BTT-2 SPEAKER TOWER WITH BLUETOOTH®, FM RADIO, USB AND SD CARD READER User Manual www.lenco.com 20130103 v1.
IMPORTANT INFORMATION: Checking the model number Before you get stared, please make sure the right user manual is included and it belongs to your device. This user manual is only intended for the Lenco BTT-2. You can find the model number on the packaging or on the specification plate on the back of the device.
Table of contents Checking the model number ....................................................................................... 2 Table of contents ........................................................................................................ 3 What’s in the box? ...................................................................................................... 6 Explanation of the symbols .........................................................................................
Connecting an AUX device ........................................................................................................... 19 FM Radio mode ................................................................................................................19 Manual tuning ............................................................................................................................... 19 Automatic tuning ....................................................................................
Bluetooth®................................................................................................................................... 29 Open standard ............................................................................................................................. 29 LED ............................................................................................................................................... 29 Sensor ..................................................................
Dear customer, This device allows you to listen to radio, stream Bluetooth® audio to this device and playback audio from a USB storage device, SD card of via the AUX input. Thank you for choosing for Lenco. At Lenco, we are convinced that everyone should enjoy life as much as possible. Our products are meant to support, improve and create joyful moments for everyone. For this reason, we offer user-friendly, highquality and well-designed consumer electronics for an excellent price.
Explanation of the symbols : This symbol indicates that there are important operating maintenance instructions in the user manual accompanying the device. This symbol indicates that dangerous voltage is present within this device, constituting a risk of electronic shock or personal injury. This symbol indicates that the action in question may not be performed by a child because there is a risk of personal injury.
Unpacking the device The operations in this chapter should not be performed by children. Get ready: a knife* or a pair of scissors * 1 Cut the tape 2 Open the box 3 Lift the device from the box and remove the foam What to do with the packaging material Lenco recommends to keep the box and foam in case the product needs transporting in the future or to store the device when it’s not being used for a long time. The other packaging materials can be disposed of according to the local regulations.
Mounting the base The operations in this chapter should not be performed by children. Get ready: Phillips screwdriver* Put the device on a flat, stable surface that is slightly elevated (for instance on a table) so that the base can easily be mounted. Place the base against the bottom of the device and secure it with the 4 included screws.
Exploring the device The instructions below will briefly explain the functionality of the buttons and controls. A detailed instruction can be found in the various chapters of this 13 14 15 16 4 5 6 7 8 9 10 manual. 1 11 2 12 1. Play / pause button, press this 3 button to pause or resume playback. 2. Previous / rewind button, press this button to skip to the previous song, hold the button to search backward in the track. 3.
14. USB port, insert a USB storage device in this port. WARNING: Do not use a USB extension cable to connect a USB device. The use of a USB extension cable can cause malfunction or loss of data. 15. AUX INPUT, connect a device that is equipped with an AUX output or headphones output to this input. 16. Wire antenna, the antenna receives the FM radio signals. 17. Power on / off switch, set the switch in the OFF position to switch off the device.
Exploring the remote control 1. Function button, press this button to switch 1 12 between the Bluetooth®, AUX, FM, SD and 13 2 USB mode. 3 14 2. Info button, in the FM mode RDS 4 15 5 information is shown on the display. Press 6 16 this button to show the frequency and PTY 7 information on the display. 8 17 3. Sleep button, press this button to display 18 sleep timer information, set the sleep timer or 19 9 turn off the sleep timer. 20 4.
19. PTY button, only works in radio mode. Press this button to select the desired program type. 20. Ran button, only works in SD & USB mode. Press this button to play tracks in a random order. 21. MO / ST button, only works in radio mode. Press this button to switch between FM mono and stereo audio. 22. Tone button, press this button to adjust the high and low tones. 23. Volume+ button, press this button to increase the volume.
Mounting the FM wire antenna The operations in this chapter should not be performed by children. The wire antenna can be found on the back of the device. If you cannot find the wire antenna, please check the section Exploring the device (number 16) to see where the wire antenna can be found exactly. Extend the wire antenna, for the best results we recommend hanging the wire antenna as high and as close as possible near a window.
Connecting the device to a power supply The operations in this chapter should not be performed by children. Before connecting the device to the mains, make sure that the mains voltage corresponds to the voltage that is suitable for the device. The information about a suitable mains voltage can be found in the specification table. If you are unsure about the mains voltage at your current location, please contact the utility company. Make sure the outlet to which the device is connected is easily accessible.
Connecting the device to the mains Fully extend the power cord and connect the narrow end to the back of the device and connect the wide end of the power cord to the power outlet. Preparing the remote control Remove the battery cover and insert 2 A-brand AAA UM4 1,5V batteries. Make sure that the batteries are placed in the right direction into the remote control (the + and the – side). After the batteries are placed, place the battery cover back.
General information about the energy saving mode This device is equipped with an energy saving mode. This means that when the device doesn’t receive any signal for 10 minutes (think of: no Bluetooth® connection, song has been paused for a long time, etc.), it switches itself off. Basic operation General operation Turning the power on or off on the device To power the device, put the switch on the back of the device in the ON position. The device will now switch to the standby mode.
Put the device in Bluetooth® mode. If the device is in Bluetooth® mode, press the pair button on the device or remote control. When the device is ready to pair with an external Bluetooth® device, the Bluetooth® LED will flash. Find "BTT-2" on the external device and connect with it. Thanks to Pair & Play™ there is no need to enter a password. Pair & Play™ allows you to pair a Bluetooth® device with a single press of a button and enjoy your favorite music right away.
Connecting an AUX device The AUX input allows you to connect any device that is equipped with an AUX output or a headphones output. The cables that are required to connect these external devices are not included with this product. The AUX input can be found on the back of the device. FM Radio mode Put the device in radio mode. Manual tuning The display shows the current frequency. You can search for the desired frequency in 2 ways: 1. Increase the frequency with steps of 0.
Searching for a radio station by program type The Program Type function (abbreviated PTY function) allows you to search for a station that is broadcasting a specific genre, for instance classical music. When the PTY function is activated, the search function will stop only at stations that belong to the set category of the PTY function. If, for instance, classical music has been set, then the search function will not stop at a station that only plays rock music.
The device will start reading the SD card. Once the SD card is read, the device will automatically start playing the files on the card. Pausing playback During playback, press the play / pause knop on the device or the remote control to pause playback, press the button once more to resume playback. Skipping to the next track During playback of an audio file, press the next button on the device or the remote control to skip to the next track.
REP DIR, this is shown on the display when all tracks in the current folder are repeated. This function can only be used when the tracks are stored into 1 or multiple folders. REP ALL, if this is shown on the display, all tracks on the storage media will be repeated. REP OFF, when this is shown on the display, the repeat function is disabled and all tracks will be played normally. USB Mode Put the device in USB mode and insert the USB storage device.
Searching backward During the playback of an audio file, hold the previous button on the device or the remote control. The device will search backward in the track until the button is released. Stopping playback Press the stop button on the device or the remote control to stop playback. Playing the content on the storage media in random order Press the RAN button on the remote control to enable or disable the random mode. When the random mode is active, tracks will be played in random order.
activated and you want to adjust or disable the sleep timer. The sleep timer is disabled when the display shows OFF. Adjusting the audio setting Via the audio settings, it is possible to adjust the high and low tones. Press the TONE button on the remote control to adjust the audio settings. Ater pressing once, BASS will appear on the display. Bass are the low tones. Press the vol+ button on the remote control to enhance the bass tones.
Breaking down the device The operations in this chapter should not be performed by children. Before breaking down the device, make sure the main power switch on the back of the device is in the OFF position. If you have trouble locating this switch, please consult the section Exploring the device (number 17) to see where this switch can be found. Do not touch the metal parts of the power cable, because there is a risk of shocks with personal injury. Get ready: Phillips screwdriver* 1.
4. Disconnect the wire antenna.
5. Put the device on a flat, stable surface that is slightly elevated (for instance on a table) so that the base can easily be removed. Loosen the 4 screws and don’t forget to hold the base, so it can’t fall down.
Storing and transporting the device The operations in this chapter should not be performed by children. Get ready: Wide sturdy tape * and the packaging material as saved according to the unpacking instructions. 1. Insert the foam and lower the device into the box. 2. Close the box shut. 3. Tape the box shut. The device is now ready to be stored or transported. Try to limit the number of shocks as much as possible during transport.
Reorder accessories Spare parts and accessories for this product can be ordered via your dealer or http://lencosupport.zendesk.com. The warranty terms on reordered accessories differ from our general warranty terms. Always inform about the warranty terms before buying accessories to avoid future complications. Available accessories: Euro plug Remote control Glossary Bluetooth®: Bluetooth® is an open standard for short-distance wireless connections between devices.
USB port: USB (Universal Serial Bus) is a standard for connecting peripherals to computers or other equipment. Flash memory: Flash memory is a non-volatile form of external memory. This technique makes It possible to write or erase in several parts of the memory using a single programming operation. Flash memory is non-volatile memory: it retains data when power is turned off. SD Card: A Secure Digital card (SD Card) is a memory card that is built from flash memory. AUX in: Auxiliary in.
Troubleshooting Problem No power. No sound or poor sound. Solution Check if the plug is inserted firmly into the outlet. Put the main switch on the back of the device in the on position. Make sure the power outlet is powered. To save energy, the device turns itself off if playback has stopped for 10 minutes. Adjust the volume or disable the mute function. Check the input source. The device does not respond or responds poorly. Settings or selections are suddenly cancelled.
Specifications Power Supply Power Connection Power Consumption Operation During storage Output Dimensions, WxDxH Weight Display Remote Control AC ~ 100-240V, 50/60Hz 1,5M euro plug Standby During use Temperature Humidity Maximum elevation above sea level Temperature Humidity Maximum elevation above sea level Output Speaker (max) + Subwoofer Frequency Response THD + noise Adjustable Bass + Treble FM band Speaker Tower (incl. base) Remote Control Main device (incl.
Safety Precautions Explanation of the symbols: This symbol indicates that there are important operating maintenance instructions in the user manual accompanying the device This symbol indicates that dangerous voltage is present within this device, constituting a risk of electronic shock or personal injury This symbol indicates that the action in question may not be performed by a child because there is a risk of personal injury. CAREFULLY READ THE FOLLOWING SAFETY PRECAUTIONS BEFORE USE.
Do not place heavy objects on the power cord or any other cables as this may damage the cord or cables. Keep the device away from children! When they play with the power cord, they can seriously injure themselves. Keep the power cable away from rodents and rabbits. These animals like biting in cables. Make sure all ventilation openings are clear at all times, do not cover or block them. Leave 5 cm (2”) free space around the device.
WARNING: Do not use a USB extension cable to connect a USB device. The use of a USB extension cable can cause malfunction or loss of data. Notice, statements and information Lenco is not liable for printing errors in the manual. Declaration of Conformity Products with a CE marking comply with the EMC directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the European Commission of the European Community.
Service and support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany The Netherlands Belgium France France (email) 0900-1520530 0900-23553626 02-6200115 0333-81484280 sav@logydis.com (Local charges) (Local charges + 1ct p/min) (Local charges) (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. When contacting Lenco, you will always be asked for the model and serial number of your product.
Do not distribute copyrighted material Do not distribute copyrighted material without the permission of the owners. By doing this you risk violation of copyright laws. The manufacturer is not liable for any legal issues caused by illegal use of copyrighted material by the user. Trademarks Lenco and the Lenco logo are trademarks of STL Group BV Pair & Play™ is a trademark of STL Group BV logo is a trademark of STL Group BV Bluetooth® and the Bluetooth® logo are trademarks of Bluetooth SIG, Inc.
Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright, patent-, trademark- and/or other intellectual property laws. Such content and services are solely provided for your personal and non-commercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
©2012 STL Group B.V. all rights reserved, Lenco is a trademark of STL Group B.V. STL Group B.V. is not responsible for any printing errors in this manual. Products of other manufacturers are only mentioned for information. This does not mean that these products are recommended by STL Group B.V.. STL Group B.V. accepts no liability for the reliability or compatibility of these products.