Operation Manual

Reset

If the device does not respond to the controls anymore, you can press the reset button with a

think object such as an paperclip. When the device is reset, the system memory is cleared

and all settings will be erased.

System settings

Setting the display backlight level

Press the dimmer button on the remote control to adjust the backlight intensity. The

intensity can be set to low or high.

Setting the clock

1. Press the mode button on the remote control to select the desired clock format.

2. Press the / buttons to select the 12 or 24 hour clock.

3. Press mode to set the hours and minutes.

4. Press the / buttons to set the hours.

5. Use the volume + / - buttons to set the minutes.

6. Press mode and wait for a couple of seconds to save the settings.

Trouble shooting

Problem

Solution

The device does not turn on

Check if the adaptor is connected correctly.

No sound

Did u select the right source? (Bluetooth®, FM or

AUX)

Has the external audio source been setup

correctly?

Has the Bluetooth® device been paired?

Press mute.

Press volume +.

The remote control does not function

Are you within operating range?

In strong light (outdoor) the remote control may

not work properly.

Replace the battery.

The device does not respond

Reset the unit.