CoolTab-72 7" (18 CM) TABLET WITH ANDROID™ 4.2 User Manual For information and support www.lenco.
Table of content Power on/off ................................................................................................... 3 Using touch screen........................................................................................ 4 Interfaces ........................................................................................................ 4 1. Desktop.................................................................................................... 4 2. Locked screen .......................
Dear customer, Thank you for buying this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this tablet, we have manufactured this product using high quality standards, materials, components, and care. Please read all safety instructions and national restrictions, before you use this tablet. Note: This user manual was printed prior to the development of this product.
Power on/off Power on: press and hold the power key for 5 seconds Power off: press and hold the power key for 5 seconds → click Power off → click OK Lock/unlock screen: press the power key to lock/unlock the screen Forced shutdown: in case of no response of the device, press Reset key to reset the device by force Note: do not use forced shutdown unless necessary. Shut down the device following power off steps. Reset key: press this key to reset the device.
4: Return to desktop 5: Shortcut key for screen capture 6: Browser 7: Camera 8: File manager 9: Shortcut key to volume10. Shortcut key to volume+ 11. Music applications 12. 3G/WIFI status 13: Battery status 4: Time display 2. Locked screen If the tablet is not used for a long time, press Power On key and enter standby mode. There are two standby modes. One is sleeping mode, at this time the screen is off. Press Power On key again to enter nap mode as shown in the picture.
C A B In this mode, click and hold Lock/unlock icon , there identifiers at A\B\C positions will appear as shown in the picture. In this interface, Camera icon is at A position, Unlock icon is at B position, and Google icon is at C position. The system will prompt you the currently activated path, as shown in the picture, the ripples at B position show the activated path.
4. You can click to go back to previous interface or click to return to desktop while keeping the music playing. The interface is shown as below: 3. Recorder Click icon Click to enter recorder mode (see the picture). to start recording, and click to stop. Click to play the recorded audio. The recorded files are named according to the recording time. You can select any one to play. In the above picture, the finger shows the sound wave intensity and the time shows the recording time.
4. Camera The camera can be used to take pictures or to make video's. Taking pictures Tap For system ver. 4.2, you can drag the taken photo to enter the album directly. When entering the to take pictures. All pictures are saved automatically. album from camera mode, you can view the pictures in thumbnail mode up to nine pictures. For system ver. 4.
5. Browser Click icon Number 1 2 3 4 5 6 7 8 9 to enter browser interface Function Opens a new tab Closes current tab Go back or to the next website in the browser history. Reloads page, if the page can’t be reloaded this changes in an “X” Enter web address or keyword. Browser options Shows favorites, history and saved pages Activates an URL field Saves the current web address as favorite. Note: The system ver. 4.1 includes Google browser.
7. Calendar Click calendar icon. When running the calendar for the first time, you will be asked to login. Enter your email address and password, click next, and complete the settings according to the guide. Then you can use the calendar. New event 1. In Calendar interface, click the date you want to add a new event to. 2. Select the time of the event →Input the details of the event in each field. 3. Click Complete. 4. Press Menu key to select the calendar interface you want.
Activating alarm clock If the alarm clock is set to repeat, you may want to pause the alarm instead of deleting it. 1. In alarm clock interface, click the icon 2. Click after the alarm clock you want to activate. to reactivate. Editing alarm clock 1. Click Clock icon, → Click . 2. Click and enter the alarm clock you want to edit → Edit. Deleting alarm clock 1. Click Clock icon, → Click . 2. Click and enter the alarm clock you want to delete. 3. Click Delete alarm clock.
. Email ☆POP3 and SMTP are supported. Adding email account You can enter one or more email addresses you want to use on the device. 1. 2. 3. 4. 5. 6. 7. 8. 9. ☆ Click Email icon. In Your account interface, click Next. Click Email address option→ Input your email address. In Password option → Input your account password. Click Complete. Manual setting (optional): the server will select provider (gmail.com, etc.) automatically according to your email account.
Opening an email 1. In Inbox interface, click an email to open it. 2. Click an attachment (if any) to enable a corresponding application to open it, or you can click Save to save it to SD card. 3. If you want to Reply, Click Reply or Reply all. a. Enter the message you want to reply in Writing email option. b. Click Send to send the email; you can also save it as draft without sending it. The email will be deleted if you don’t save or send it. 4. To delete an email, click Delete. Writing a new email 1.
1. Click Email icon 2. In Inbox interface, click Menu→ Account setting. 3. Click Default account to select it. If you delete the default account, the next one in the list will become default. 13. File manager Click File manager icon to view all files saved in the device (internal storage, SD card, USB disk), and you can install Android applications to your device in a fast and convenient way.
Settings Wireless network Wi-Fi Set and manage wireless access point (refer to WIFI setting for details). Bluetooth Set and manage Bluetooth signals. Enable and click name of Bluetooth device, ensure the device to be detectable by all Bluetooth devices nearby. After that, all Bluetooth device nearby can be searched. This function optional is Set and manage data traffic. Traffic More… Device Energy saving mode Portable hotspot Set WIFI hotspot Ethernet Configure wired network.
Language and input method Device management 1. Add or delete device manager. 2. Unknown source APK installation settings. Credential storage Manage application access security credentials and other credentials. Language Set default language Keyboard input method and Set default keyboard and input method Sound Set relevant parameters for sound function Mouse/Touchpad Adjust mouse speed. Backup and reset 1. Backup/restore device data. 2. Restore default settings.
3. After 3G network card is connected, click Settings →Wireless and network→More→Mobile network for 3G network settings. 4. Enable mobile network, tick Enable data traffic→Data roaming, then select Access point name, select Menu and select available network for 3G network access. 5. General device can be used directly, but for a few devices, APN needs to be created and network access shall be set before use.
Downloading, installing/uninstalling applications ☆You can find many free interesting Android applications in the internet. Just open the browser and search for “Android applications”. The Android applications you purchase or download can be installed through File manager in a fast and easy way. 1. Copy the .apk file you want to install to SD card or USB disk →Insert the card or connect USB disk to the device. 2. Click 3. Click File manager icon. or and find the folder in which .apk file is saved.
, then select Enable USB device, then you can save data to the device via PC, as shown in the following picture: Charging Connect one end of the power adaptor to socket, and the other end to the power socket of the device for charging. During charging, the icon of battery will be be , and when charging completes, the icon will . You shall not charge the device via a USB cable. You can still use the device while charging, but this will prolong the charging time.
Keep your personal and important data safe While using your tablet, be sure to back up all your important data. Lenco is not responsible for any loss of data. When you want to dispose of your tablet, back up all data and then reset your tablet to prevent misuse of your personal information. Carefully read the permissions screen when downloading applications. Be particularly cautious with applications that access many functions or access a significant amount of your personal information.
Service and support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany 0900-1520530 (Local charges) The Netherlands 0900-23553626 (Local charges + 1ct p/min) Belgium 02-6200115 (Local charges) France 03-81484280 (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. When contacting Lenco, you will always be asked for the model and serial number of your product.
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community Hereby, STL Group BV, Ankerkade 20 NL 5928 PL Venlo, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at https://lencosupport.zendesk.com/forums/22413161-CE-Documents This product operates at 2400 - 2483.
If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the power outlet immediately. Disconnect the plug from the power outlet during lightning storms. Disconnect the plug from the outlet when the device will not be used for a long time. Do not step on the power cord and don’t pinch the power cord.
