Cooltab-74 18 CM (7") TABLET WITH ANDROID™ 4.4 User manual For information and support www.lenco.
Table of content Startup and Shutdown......................................................................................................................6 Usage of the Touch Screen............................................................................................................... 6 Interface Introduction...................................................................................................................... 6 1.Desktop................................................................
Dear customer, Thank you for buying this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this tablet, we have manufactured this product using high quality standards, materials, components, and care. Please read all safety instructions and national restrictions, before you use this tablet. Note: This user manual was printed prior to the development of this product.
Keep these instructions in mind: Do not use this device near water. Clean only with a slightly damp cloth. Do not cover or block any ventilation opening. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device. Install in accordance with the supplied user manual. Don’t step on or pinch the power cord. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power cord, which may damage it.
Avoid placing the device on any surfaces that may be subject to vibrations or shocks. When the device is not in use for long periods, unplug the AC power cable for safety reasons. Do NOT knock on, press, hit or shake the screen as you may damage the internal circuits. To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
Startup and Shutdown Startup: Please press and hold the Power Key for 5s. Shutdown: Press and hold the Power Key for 5s → Click Shutdown → and Confirm Locking and Unlocking the Screen: Press the Power Key very quickly to lock or unlock the Screen. Forced Shutdown: If the device has not responded for quite a while, please press and hold the Power Key or the Reset Key to reboot the device.
6:Multitask Selection Key 7:Back to the Desktop from the Program Interface 8:Shortcut Key for Back to the Previous Interface 9:Shortcut Key for Volume Up 10:Battery Power Status 11:Time Display 12: View all Application Programs 2. Screen Lock A B The device will enter stand-by status if there is no operation for quite a while or the User has pressed the Power Key.
2. The device will enter the Video Playing Interface if the User has selected a video file to play. The Control Menu as shown in the following Diagram will appear on the Screen, and then the User can properly adjust the Videos (including Volume Down and Volume Up, Progress Bar, Video Brightness Up and Down, Previous, Pause/Play, Next, Screen Size, Small Window Playing, Playing Mode, Subtitle, Locking, Add a Video and Settings). 2.
1.Rank audio files according to Artists; 2.Rank audio files according to Albums; 3.Rank audio files according to Songs; 4.Automatically set the Playlists; 5.The Song is Now Playing. 1 2 3 4 5 3. Sound Recorder Click the Icon to enter the Recording Interface (as shown in the following Diagram).
Click the Icon Please click the Icon to start recording and click and click the Icon to finish recording. to play the recording file the User just finished. The recording files will be named according to the time, and the User can randomly select one recording file to play; as shown in the above Diagram, the green part of the Progress Bar represents the sound wave and the recording time is being displayed on the bottom right corner. 4.
Take a Picture 1. After the Camera has been enabled, please click the Icon to take a picture, and the picture will be automatically saved. 2. It is possible for the User to move the Picture into the Photo Album. Under the Camera Mode, the User can enter the Photo Album and view various photos in the form of Sudoku, and 3 pictures can be displayed at the same time at most. 3.
Click the Icon 1 to enter the Browser webpage: 2 3 4 1: Previous webpage you have browsed and you can view it again as you like; 2: Current webpage;3: Add a webpage; 4: Menu Key 6. Play Store Open to search and download relevant application programs. Enter the Play Store for the first time and the System will ask you to log in google account (if you do not have a Email account, please apply for one account in http://gmail.google.com ). 7. Calendar Click the Calendar Icon .
8. Clock Click the Clock Icon to reveal the current date and time. Alarm Clock It is possible for you to set up several alarm clocks at the same time. ☆ When the Icon Add an Alarm Clock appears on the Screen, at least one alarm clock will sound. . 1. Click the Clock Icon 2. Press the Menu Key → Add an Alarm Clock. 3. Set the Alarm Clock you need. ☆ If the User do not select Repetition, the Alarm Clock will sound for once and then be automatically deleted. 4. Click Enable the Alarm Clock. 5.
2.Click and select the numbers and symbols to conduct calculation. 3. Click Clear to eliminate the numbers and symbols one by one, and press Clear for a while to eliminate all numbers and symbols. 10. Downloads 1. Click the Icon . 2. View the software programs which have been downloaded at present and select the software application you want to conduct installation. 11. Maps ☆ In order to enable this function, your device must be connected with the Internet.
8. Optional: Input the Account Name. 9. Input the Name for sending e-mails, and then click FINISH. ☆ Upon the completion of settings, please confirm with your Email Supplier whether their server supports POP and SMTP transport protocol if your device cannot connect to a free Email Account. My Messages 1. Click the Email Icon . 2.
☆If you have configured more than one Email Account and have deleted the default account, the next account in order will then be the default account in your system. 1. Click the Email Icon . 2. In My Messages, click Menu→ Accounts. 3. Click and delete the Account as you like. 4. In the Account Options, please click and Delete the Account you want. 5. Click Confirm to successfully delete the account.
1. Click the Icon or the Icon to open relevant storage device and display the files saved in your storage devices. 2. Click the file or folder you want and hold on for a while, and then select COPY. 3. Click the Icon , and go back to Home to find the Storage Device Symbol → Click the Storage Device Symbol you want → Click Editor → Select Paste. Delete the Files Press the file or folder you need and select DELETE. 14.
Cast screen User can set it open and make wireless display on HD TV Memory Usage Condition Show the Storage Capacity status as well as the Format and Storage Unload function of the Storage Device; Battery Show the Battery Data; Application Manage and display various application programs within this Programs device; Private Settings Location Information Screen Lock Safeguard the Screen. Owner Information To display the User’s information on lock Screen; Passwords Device Management 1.
Printing Connect it with a Printer to print local files; View the Status Information, Battery Service Condition, Legal About the Tablet PC Information, Model, Android Version, Kernel Version and Version Number. Wi-Fi Network Settings As the Wi-Fi connection is important to enable various functions of this device, please firstly configure the Wi-Fi network for your device. 1. Click the Icon → Settings → Wireless and Network. 2. Please turn ON Wi-Fi.
MNC:01/ Authentication Type: Not set/ APN Type: Not set/ APN Protocol: Not set Upon the completion of settings, the device can successfully connect to the 3G Network, and the Icon will appear on the Screen. The Icon in gray is to search the available network, and the Icon in Blue means that the device has been successfully connected with the 3G Network. As shown in the Diagram ,the device is conducting data transmission. Usage of the Extended Memory 1.
3. Click the Icon or the Icon to find the .apk files or folder. 4. Select one .apk file → Install. When such application program has been installed, its Icon will display itself among other application programs. 5. Click and directly run relevant program; or click and go back to the File Explorer. Install Application Programs through Online Downloading It is possible for you to download Android application programs from the Internet or other Android stores, and to quickly install them into your device. 1.
Charging This device can be charged by means of the Power Adapter with one end connecting to the Power Adapter and the other end to the micro usb port of this device.
Please protect the Power Cable. When it has been connected with the power supply, please do not tread on it or place other objects above it. Please pay special attention to the joint of the Power Cable Connection Device. Please use the original power adapter to conduct charging for this device. Other chargers may cause damages to this device. Please do not disassemble the casing or repair this device by yourself. Please take good care of the Display Screen.
Service and support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany The Netherlands Belgium France 0900-1520530 (Local charges) 0900-23553626 (Local charges + 1ct p/min) 02-6200115 (Local charges) 03-81484280 (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. When contacting Lenco, you will always be asked for the model and serial number of your product. The serial number can be found on the back of the device.
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Hereby, STL Group BV, Ankerkade 20 NL 5928 PL Venlo, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at https://lencosupport.zendesk.com/forums/22413161-CE-Documents This product operates at 2400 - 2483.
