DELUXE ALARM CLOCK STEREO RADIO COMPACT DISC PLAYER CR-2400 CD INSTRUCTION MANUAL
INTRODUCTION Thank you for purchasing our product. You now possess a stylishly designed quality deluxe stereo Compact Disc Player/Alarm Clock Radio. Used carefully and in accordance with the instructions set out below your stereo Compact Disc Player/Alarm Clock Radio should give you many years of trouble free service. Please read the instructions carefully to obtain the best results from your purchase.
IDENTIFICATION OF CONTROLS 1. AUTO/ALARM SWITCH 2. CD PROGRAM BUTTON 3. CD SKIP BACKWARD BUTTON 4. CD SKIP FORWARD BUTTON 5. CD STOP BUTTON 6. BAND SELECTOR 7. TUNING CONTROL 8. CD DOOR OPEN/CLOSE 9. CD PLAY/PAUSE BUTTON 10.CD REPEAT BUTTON 11. POWER ON/OFF BUTTON 12. HOUR SET BUTTON 13. RADIO/CD MODE BUTTON 14. MINUTE SET BUTTON 15. VOLUME DOWN BUTTON 16. VOLUME UP BUTTON 17. SLEEP BUTTON 18. TIME SET BUTTON 19. ALARM SET BUTTON 20. PHONES JACK 21. AC VOLTAGE SELECTOR( For dual voltage) 22.
POWER SOURCES MAINS POWER Plug the AC MAINS POWER PLUG into the standard household AC receptacle. The L CD display will show 0:00. Warning: Before insert the MAINS POWER PLUG into the household receptacle, please make sure the AC VOLTAGE SELECTOR MUST be set to your local voltage.(optional) BATTERY STANDBY Connect a 9V battery (note: not supplied) into the BATTERY COMPARTMENT to keep the clock Running and memorizing when the mains power is disconnected. RADIO OPERATION 1. 2. 3. 4. 5. 6.
SLEEP (AUTO-STOP) FUNCTION To switch off the CD or RADIO playing automatically in 90/60/30/10 minutes before you fall asleep, start RADIO or CD playback, press the SLEEP BUTTON, each time you press, the LCD display will show 90/60/30/10 sequently, then slide the ALARM/AUTO selector to AUTO. After 90/60/30/10 minutes, the playback will stop automatically. To resume playing, press SLEEP BUTTON once again. WAKE UP TO MUSIC (CD or radio) 1. Set the alarm time as ALARM TIME SETTING described. 2.
USING THE CD LOADING A DISC 1. Set the FUNCTION switch to CD position. 2. Open the CD door. 3. Place an audio CD into the tray with the label side facing up. 4. Close the CD door. The total number of tracks will appear on the display. 5. To remove the CD, press OPEN to open CD compartment lid, grasp the CD by its edge, and carefully take it out. Note: To ensure good system performance; wait until the disc tray completely reads the disc before proceeding.
To Erase the Memory(Program) To clear the program, you may have two ways: 1. Press STOP button when the disc stopped, or 2. Open the CD compartment lid, program will be erased. REPEAT You can play one track or all tracks on the disc repeatedly. To Repeat a Single Track 1. Press REPEAT button once in play, "REPEAT" shows flashing on the display. The current track will be played over and over again till you press STOP button. 2. To cancel repeat play, press REPEAT button twice.
