User manual

Skip up (13) again to select FM stereo, then press Enter button (4) to confirm. When

stereo signals are weak and noisy. It is preferable to change the FM mode by same

procedure.

Hints for best reception:-

FM: the receiver has rod antenna (18) hanging at the rear cabinet. This antenna should be totally

unraveled and extended for best reception.

Radio data system (RDS) (On remote control only)

This is the features to display the information which released from the radio broadcast and will

showed on LCD display step by step as below by pressing the Play mode/info button continuously

(on remote control).

Radio text  program type  frequency  mono/stereo  time  date

Digital audio broadcasting (DAB) radio

1. Set the unit to DAB mode by press Function button (7).

2. Press the Play/pause /Scan button (3) once, unit will start to full scan from range 11b-12d

one time. Press Skip down (12) or Skip up (13) button to select your desired DAB

channel then press “Stop/Enter” button (10) to confirm the selected channel.

3. Press the Play mode/info button (on remote control) continuously to check the below info

released by DAB.

signal strength  program type  Group name  frequency  signal error  transfer rate

 time  date

4. Adjust volume knob (14/15) for the desired volume level.

Dynamic range control

This apparatus provide three dynamic range mode to match different program type in DAB mode.

1. In DAB mode, press “Menu/Mem/clk-adj” button (16) to enter the “Menu”, then press Skip

down (12) or Skip up (13) button to select “DRC”.

2. Press “Stop/Enter” button (4) to enter the “DRC” setting, then press Skip down (12) or

Skip up (13) button to select “DRC high/low/off” mode. Then press “Stop/Enter” button

(4) to confirm the setting.

3. In any state press “Menu/Mem/clk-adj” button (16) to quit the setting mode

Language setting

This apparatus provide 4 language for FM/DAB operation display.

1. In DAB/FM mode, press “Menu/Mem/clk-adj” button (16) to enter the “Menu”, then press

Skip down (12) or Skip up (13) button to select “System”.

2. Press “Stop/Enter” button (4) to enter the “System” setting, then press Skip down (12) or

Skip up (13) button to select “Language” then press “Stop/Enter” button to enter

language mode, then press Skip down (12) or Skip up (13) button to select your

desired language between English/French/German/Italian. Then press “Stop/Enter” button (4)

to confirm the setting.

3. In any state press “Menu/Mem/clk-adj” button (16) to quit the setting mode

Preset stations

You can store up to total of 20 radio stations in the memory (10-FM/10-DAB).

1. Set to FM/DAB mode.

2. Turn to the desired radio station by “manual” or “auto” tuning method.

3. Press and hold the “Mem/clk-adj” button (16) to enable memory state.