User manual

11
the side of the unit. Then press Function button (3) to “AUX” mode. Start to playback your
external device to enjoy your music.
More features (on remote control only)
A. Alarm clock setting
This function allows the system to turn on automatically and wake you up CD, FM/DAB, or USB
mode. Set the system at standby mode, then press and hold the “Timer” key to enter the Timer
setting mode, LCD (1) will show Timer On time, Moreover, the timer clock will flash the hour
digit, means the unit already enter timer setting mode.
1) On time setting:
Press the skip up or down (13/12) to set the hour. Then press
Timer button to store the timer starting hour, minute digit will flash, press
skip up or down (13/12) to set the minute. Then press Timer
button to store the timer on time
2) Off time setting:
After above step, the LCD (1) will show “Timer Off” and hour digit was
flashing. Press skip up or down (13/12) to set the hour. Then
press Timer button to store the timer off hour, minute digit will flash,
press skip up or down (13/12) to set the minute.
3) Mode:
Then press skip up or down (13/12) to select timer on mode.
Then press Timer button to store the timer on mode. Press skip up or
down (13/12) to select timer on volume level and press Timer button
to complete the timer setting. Unit will return to standby mode display
will show timer icon “ ”.
Active/de-active timer function (In standby mode only)
1. To active timer function, press the “Timer” button once the timer indicator “ ” is appear on
LCD display (1).
2. To cancel timer function, press again “Timer” button again the timer indicator “ ” disappear.
Remark:-
If there is no music source being detected (CD or USB) when the preset time is reached,
system will default to “FM” function for wake up mode automatically. The system will preset
at the latest radio frequency being listened before switching off
For FM/DAB wake up, the system will preset at the latest radio frequency being listened
before switching off.
There are about 4 seconds for alarm setting mode, this system will return to normal mode
automatically if no keys being pressed in this time frame.
During the alarm on mode, press the “On/standby” button (5) will switch off the system.
B. Sleep function (on remote control only)
1. Press “Sleep” button “SLP-90” will show on the LCD display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 > ….
10 minutes respectively and sleep icon “ ” will indicate on LCD.
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press “Sleep” button until “SLP-off” displayed and the “ ”
indicator disappear on LCD display.
Remark (for Europe market only): Due to ErP stage two requirement and protect the
environment. The unit will switch to standby mode automatically once no any music playing
over 15 minutes.