Operation Manual

12
Troubleshooting
If you have any questions, please consult the troubleshooting guide below.
NO PICTURE OR SOUND
Ensure the power button is on.
Ensure the power outlet is
operational.
• Ensure the power cord is not
damaged.
• Ensure the power plug is
connected firmly to the
outlet.
"BAD DISC" DISPLAYED
• Ensure the disc is not distorted,
damaged or deformed.
• Ensure the disc is not badly stained
or damaged.
• Ensure the disc format is
compatible with the player.
• Please check whether you have
tried to play a software CD.
If so, please restart the player.
PICTURE BUT NO SOUND
Ensure the audio jacks are securely
connected.
Ensure the audio connector is not
damaged.
Ensure the volume is turned up in
VOUCH setup.
Ensure you have set the player's
AUDIO settings correctly.
• Ensure you have entered the
correct AV input for your TV
Ensure the audio is not set to mute.
REMOTE CONTROL IS NOT WORKING
• Make sure the Main units POWER button is
on
Ensure the batteries are working.
Point the remote control directly at the
player's Infra red sensor
Remove any obstacles between the remote
and the Infra red sensor.
SOUND BUT NO PICTURE
Ensure the video jacks are securely
connected.
• Ensure you have entered the correct AV
input for your TV
Ensure the video connector is not damaged.
Ensure you have set the player's VIDEO
settings correctly.
UNIT NOT WORKING
• Turn off the power, then turn it on again.
POOR PICTURE OR SOUND
• Ensure you have set the player's AUDIO
settings correctly.
• Ensure the disc is not scratched or stained.
• Ensure the AV connector or the output
terminal is not damaged.
"NO DISC" DISPLAYED
• Ensure you have put the disc on the tray.
• Ensure the disc is not upside down.
• Ensure the disc is not distorted, stained or
scratched.