PDVD-12509 MTK1389Q方 案(带EUP说 明 书) 22,5 cm (9”) portable dvd player with swivel screen & USB / SD USER'S MANUAL DVP-936 For information and support,WWW.lenco.eu Before connecting, operating or adjusting this product, please read this user's manual carefully and completely.
Table of Content Contents Table of Contents 1 Important Safety Instructions 2 Safety Precautions 3 SETUP Menu Setting General Page Audio Setup Page Identification of Controls 4-6 Video Setup Page Preference Page Password Setup Page Main Unit Remote control unit 7 7-8 8 8-9 9 4 Battery Parameters 10 Parameters and specifications 10 5-6 Dear Customer: Thank you for purchasing this Portable DVD player with swivel screen & USB/SD.
Important Safety Instructions Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture.
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: This digital video disc player employs a laser system. Use of controls,adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure. Warning: To prevent direct exposure to laser beam,do not open the enclosure.Visible laser radiation when open. Warning: Never stare directly into the laser beam.
Basic Operation: I. How to connect the AC/DC adaptor ● Connect the adaptor plug on the adaptor cable to the DC IN 9-12 V connection. ● Connect the mains plug to a wall socket. II. How to connect the car adaptor ● Collect the car adaptor to the unit and car III. How to switch on the unit ● To switch on the appliance, slide the ON/OFF to the ON position. To switch off the appliance, slide the ON/OFF to the OFF position. IX.
Identification of Controls Main Unit 1.TFT screen 2.Speakers 3.MENU(DVD),PBC(VCD) 4.SOURCE Select input source, DVD, card,USB. 5. Display 6. Mute 7.OK(ENTER) Confirms menu selection. 8. (Left/right/up/down) Select an item in the menu. When playing ,VCD,DVD,if available: Up:Fast forward Down:Fast reverse Left:Previous track Right:Next track 1 2 3 4 9. SETUP 10. STOP ( ) Stops playback. 11. Play/pause. 12.Open 13.CARD 14.USB 15.VOL+/VOL16.Headphone out jacks 17.AV OUT 18.Power ON/OFF switch 19.
Identification of Controls Remote control unit 17 STEP 1 18 19 20 SOURCE 3 4 5 6 7 8 9 0 10+ DISPLAY SUBTITLE AUDIO MENU /PBC ENTER MODE VOL- REPEAT 1 5 4 6 9 8 11 12 13 ZOOM 14 7.AUDIO DVD Press AUDIO repeatedly during playback to hear a different audio language or audio track, if avilable. MP3 CD VCD Press AUDIO repeatedly during playback to hear a different audio channel ( Left,Right,Mix,Stereo). 8.
Identification of Controls Remote control unit 15. BUTTON Press BUTTON allow skipping back at 5-level speed(X2->X4-> X8->X16->X32 -> PLAY), press PLAY button return to normal playback. 16.STEP Step the motion in DVD mode. 17.SEARCH Goto time point , title or chapter you want in DVD Mode. 18.SUBTITLE Press SUBTITLE repeatedly during playback to hear a different subtitle languages. 19.ANGLE DVD :Press ANGLE will change the view angle, on DVDs that support this feature. 20.TITLE Return to DVD title menu 21.
SETUP Menu Setting General Setup Page Press SETUP button to get the setup menu. Use direction buttons to select the preferred item. After finishing settings, press SETUP again to normal display. The following menu items can be changed: General Setup Page WIDE 16:9 ON ENG ON ON OSD Language You can select your own preferred language seetings. Closed Captions Closed captions are data that are hidden in the video signal of some discs.
SETUP Menu Setting Audio Setup Page Downmix This options allows you to set the stereo analog output of your DVD Player. Video Setup Page Video Setup Page - - VIDEO SETUP PAGE - - LT/RT :Select this option if your DVD Player is connected to a Dolby Pro Logic decoder. Stereo :Select this option when output delivers sound from only the two front speakers. Digital Output The function is used to select the SPDIF Output:SPDIF Off,SPDIF /RAW,SPDIF/PCM. SPDIF Off: Turns off the SPDIF output.
SETUP Menu Setting Password Setup Page Preference Page Password: select the menu password change page. PAL - Select this if the connected TV is PAL system.It will change the video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system.It will change the video signal of a PAL disc and output in NTSC format. Auto:Chang the video signal output automatic according to the playing disk format.
Parameters and specifications Battery Parameters Electronical parameters Battery Parameters Standard requirement Item Battery Specifications: Output:7.4V Power requirements : AC 100-240 V , 50/60 Hz Dimensions (Approx.) : 230(L)X175(W)X45(H)MM Charge / Discharge Time: Standard charge time:3h ~ 4h Power consumption : <10W Storage and work circumstances: Weight (Approx.) : 0.9 kg Operating humidity : 5 % to 90 % 1.