DVT-221 USER MANUAL BENUTZERHANDBUCH GEBRUIKSAANWIJZING
TO THE CUSTOMER: Thank you for purchasing this LCD TV. When opening the box for the first time, please check whether all the accessories are present. Before connecting parts and power, please carefully read the user manual and always keep these instructions handy and close by your LCD TV. Contents TV................................................................................ Safety precaution...........................................................................................2 Accessories........
1.Safety precaution Notes: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insinuated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO AUTHORISED SERVICE PERSONNEL.
SAFETY WARNINGS Before using this product, read and follow all warnings and instructions. This product is not intended for use by young children. Young children should be properly supervised. This product is intended for household use only and not for commercial or industrial use. Do not expose to dripping or splashing. No naked flame sources, such as lighted candles, should be placed on the product. Allow suitable distances around the product for sufficient ventilation.
3.
4.Remote control functions POWER: Power on/off button , press once to turn the TV on and press again to turn the TV off. SLEEP: Sleep button , setting TV power off time. MUTE: Mute button , press once to disable the audio and press again to enable the audio. 0,1-9:TV channel selection button. -/--:TV channel range selection button, select TV channel by entering 1,2 or 3 digits.
5.LCD TV panel overview TV Control Panel VOL- VOL+ CH- MENU CH+ 2 1 SOURCE POWER 3 5 4 1.Volume adjusting. 2.Channel selecting. 3.Main menu display and confirm. 4.Selecting exterior signal input. 5.On/off button. 3 2 1 1.STOP button 2.PREV button 3.PLAY/PAUSE 4.NEXT button 5.OPEN/CLOSE button 4 5 TV Terminal connections PC AUDIO RF(75 ) R L Pr SCART Pb Y VGA DC-12V 7 1.PC AUDIO 2.Antenna/close circuit TV network port(75 Ohm VHF/UHF). 3.Audio-L-R input terminal. 4.
6.Connecting to exterior devices RCA terminal is used to connect the output device of DVD (480I/480p/576I/576p/720P/1080I) VIDEO/L/R DVD The rear of TV Left/right Camera Video recorder S Video VCR Notes: 1.VIDEO-L-R/S-Video use a common Audio in. 2.VIDEO-L-R of DVD is corresponding to VIDEO-L-R of LCD TV. 3.Scart to Scart from a VCR. 4.PC to VGA OK 5.
7.OSD basic adjustment VIDEO MENU VIDEO MENU BRIGHTNESS CONTRAST COLOUR SHARPNESS 50 50 40 50 1. Use / to select what you want to adjust in the VIDEO menu. 2. Press and button to adjust. 3. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu. BRIGHTNESS Press the / buttons and then use / to adjust the brightness of the picture. buttons and then use / to adjust the contrast of the picture.
AUDIO MENU AUDIO MENU VOLUME BALANCE AUDIO PRESET TREBLE BASS 40 50 PERSONAL 50 50 1. Use / to select what you want to adjust in the AUDIO menu. 2. Press the and buttons to adjust. 3. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu. VOLUME Press the / buttons and then use / to adjust the sound level. Press the / speakers.
TV MENU TV MENU CHANNEL SYSTEM SKIP AFC FINETUNE SWAP MANUAL SEARCH AUTO SEARCH 4 I OFF ON 175.85MHz 1. Use / to select what you want to adjust in the TV menu. 2. Press the and buttons to adjust. 3. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu. CHANNEL The current program number. Press the / buttons to select the upper or lower program. SYSTEM The TV sound system. Press the as BG/DK/I.
FROM: 3 TO: 3 SWAP - Press - Press - Press / to select the current channel. / to select the swap channel. to swap the channel. Manual Search The manual search option allows you to preset channels one by one, in the program order of your choice. - Press the / buttons to select up and down. - Press / to increase or decrease the frequency. DOWN UP 264.25MHz AUTO SEARCH Press the / buttons and then use to search stations that can be received automatically.
GENERAL MENU GENERAL MENU LANGUAGE BLUE SCREEN NOISE REDUCE INPUT SOURCE TXT LANGUANGE TXT EAST/WEST ZOOM RESET ENGLISH ON MID TV PAN EUROPEAN WEST FULL 1. Use / to select what you want to adjust in the GENERAL menu. 2. Press the and buttons to adjust. 3. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu. LANGUAGE Press the / buttons and then use / to select the language of OSD (On Screen Display).
PC MENU PC MENU BRIGHTNESS CONTRAST COLOUR SETTING AUTO CONFIG H-POSITION V-POSITION PHASE CLOCK 50 50 USER 0 0 0 0 1. Use / to select what you want to adjust in the PC menu. 2. Press the and buttons to adjust. 3. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu. NO INPUT BRIGHTNESS Press the / buttons and then use / to adjust the brightness of the picture. buttons and then use / to adjust the contrast of the picture.
PHASE Press the / buttons and then use / to adjust the phase of the picture. CLOCK Press the / buttons and then use / to adjust the clock of the picture. SOURCE SELECT TV SCART PC-RGB YPbPr DVD Press”SOURCE” button to select a source from TV,SCART,PC-RGB,YPbPr,DVD.
DVD Operation
Basic operation 1. Turn ON and OFF the DVD function - Turn on the LCD TV and then press the source button repeatedly to select DVD mode. 2. Inserting a disc - Insert the Disc into the Disc slot (Data side of the disc has to face towards the front of the unit), the player will load the disc automatically. There will be an on screen indication “CLOSE” then “READ”. After loading the disc content, it will switch to play mode automatically.
Supporting DVD format This products can play the following format of DVD disc. Disc Type Disc Size (Diameter) Recorded Time Recorded Content Single side:120mins. Approx Remarks DVD format: Compressed digital audio and video DVD 12cm Super VCD 12cm 45mins. Approx MPEG2 Compressed digital audio and video Include SVCD VCD 12cm 74mins. Approx MPEG1 Compressed digital audio and video Include: VCD2.0/ VCD1.1 VCD1.0/ DVCD CD 12cm 74mins. Approx CD-DA: Digital audio HD-CD 12cm 74mins.
DVD Functions operating instructions 1. Play (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) - For DVD disc, press the button from the root or title menu; while playing the DVD, you may play your favorite title directly with title selection by pressing the TITLE button. - For Super VCD & VCD discs, while playing the disc, you may play your favorite tracks by the numeric buttons. - For CD, CD-G & HD-CD discs, while playing the disc, you may play your favorite tracks by the numeric buttons.
For DVD discs, (2 pages) Press the INFO button once to display the first page as shown below: Disc Type Chapter Tiltle -/-(Current/Full) Elapsed disc time -/- (Current/ Full) Press the INFO button again to display the second page shown below: Audio Language Audio Type -/- (Current/ Full) or OFF Angle ON/OFF Subtitle -/-(Current/Full)or OFF Press the INFO button again to turn off the on screen display.
10. Mute (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) - Press the MUTE button to mute the audio output. There will be an symbol indicating “MUTE”on screen. - Press again to cancel, or Press VOL+/VOL - to cancel and adjust the volume. - In case there is no audio output, try to press the MUTE button to cancel mute. 11.SUBTITLE (for DVD and Super VCD discs) - Press the SUBTITLE button once to display current subtitle. - Press again to toggle between different subtitle modes in sequence.
- Using the navigation buttons to check your favorite folder and playback the first file or move to the next favorite file. - During picture playback, you may use navigation buttons to flip / rotate the picture. button to flip horizontally. button to flip vertically. button to rotate left 90°. Button to rotate right 90°. - During picture playback, you may use the MENU/FAV button to enter preview mode to dislay 6 pictures.
NOTE: PAL format is generally used for TVs in the UK. Check your TV user guide for supported formats. If NTSC is selected with a non-compatible television you may experience interference or picture scrolling. TV Type DVDs are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios: 4:3 PS (Normal) 4:3 LB (Normal) 16:9 (Wide) - Select the most appropriate aspect ratio for the DVD being viewed.
NOTE: Only editable when the password is unlocked. It can only function when the password is locked. It does not, however, reset either the Password or the Rating setting. Default Setting - Press the ENTER button to restore to factory default. Language Setup Press the DVD/DVB setup button to enter the DVD OSD menu. FRENCH GERMAN SPANISH - OSD Language Use the navigation buttons to select the OSD LANGAUGE setup icon, press the ENTER button to confirm.
NOTE: If the selected language is not included in your DVD disc content, it will select the default language of the disc automatically. The default language setting is English. MENU Language GERMAN SPANISH FRENCH NETHERLANDS - Use the navigation buttons to select the MENU LANG setup icon, press the ENTER button to confirm. There are 8 languages for your selection, press the & buttons to toggle between the different languages. (ENGLISH / GERMAN / SPANISH / FRENCH / NETHERLANDS).
Dolby Digital Setup Dynamic Range - With the dynamic range mode you can adjust the compress radio . When selected FULL, the peak signal value is smallest. When selected OFF, the peak signal value is biggest. Dual Mono - You can select four different audio outputs, STEREO, MONO L, MONO R, MIX MONO. The audio out description of these Selections is shown in the table below.
Trouble shooting Before contacting a service technician, perform the following simple checks. If any problem still persists, unplug the LCD TV and calling for serving. PROBLEM POSSIBLE SOLUTION No sound and picture - Check that the main plug has been connected to a wall outlet. - Check that you have pressed the POWER button on the front of TV set. - Check the picture contrast and brightness settings. Normal picture but no sound - The remote control does not work Check the volume.
NOTE: There is a problem in VGA mode.(Only VGA mode applied) PROBLEM The signal is out of range. Vertical bar or stripe on back ground&Horizontal Noise&Incorrect position. Screen color is unstable or single color. POSSIBLE SOLUTION - Adjust resolution, horizontal frequency, or vertical frequency. - Check whether the signal cable is connected or loose. - Check the input source. - Work the auto configure or adjust clock, phase, or H/V position. - Check the signal cable. - Reinstall the PC video card.
Specifications Panel Features Screen Size Active Area Aspect Ratio 22 inch 173.76mm(H) X296.1mm(V) Panel Resolution Brightness 1680 X 1050 300 cd/m² Contrast Ratio Viewing Angle 700:1 16:10 176º(H) X 176º (V) 0.282mm(H) X 0.282mm(V) Dot Pitch Maximum Colour 16.