Operation Manual

- 24 -
1. Press the POWER button to turn on the power. Press the SOURCE button and select DVD,
press the ENTER button to confirm and shift to DVD mode.
2. Insert the disc with its printed side. (Referring to the picture below.)
3. Easily put the disc into the disc tray .
4. The disc is automatically pulled into the disc tray, the player will play it automatically in DVD
mode.
Warning: Do not play damaged discs that may damage the player s lens.
DVD Playback
Auto D VD Function
Whether it is in DVD mode or not , when inserting disc into the disc tray, it will shift to DVD mode and
start playback automatically, and when the disc is injected, it will return to the prior mode
automatically.
R egion Code
DVD players and di scs are coded by region. These regional codes must match the play ed discs. If
the codes don t match, the disc cannot be play ed . This player s default code is region 2.
Play
Press the PLAY button to start playback. Press the STOP button once on the remote control to stop
playback , and press the PLAY button again to resume playback.
DVD Playback
Operation
Stop
Press the STOP button once to stop playback and press the PLAY button to resume normal
playback . Press the stop button twice repeatedly to stop playback completely.