EB-900 eBook Reader User Manual For information and support, www.lenco.
Table of Contents Disclaimer ……………………………..………………………..……………………………………..…… 1 Introduction …………………………………………………..…………..………………………….…. 1 Package Content ……………………………………………………..………………………………... 1 Getting Started …………………………………………..………….….………………..……………. 2 Parts and Controls ……………………..………………………………….…..…..… 2 Power on Reader………………………..…………………………………….………. 3 Charging ………………………………….………………………………………...... 3 Inserting Memory Card ……………………………………………..……..….... 4 Starting from Home Menu ……………………………..…………..……..…....
Disclaimer 1 All the information, design and specifications contained in this manual were correct at the time of publication. However, as the product is under development and upgrading, the final device may have a slightly different appearance or modified functionality than presented in this manual. Introduction EB-900 is an eBook reader with full color display screen. EB-900 supports eBooks encrypted with Adobe DRM. 1. 2. 3. 4.
Getting Started 2 Parts and Controls 1. Charging indicator-when the reader is being charged, a red light is on, when fully charged, a blue light is on. 2. Power button – press and hold for 3 seconds to turn the reader on/off, press and hold 6 seconds to reset 3. Volume +/- button 4. Menu button– press to display Option Menu 5.
Getting Started 3 6. OK/ Directional buttons -OK button- Press to confirm or cancel. -Directional buttons –roll the button up/ down/ left/ right to move the cursor 7,8. Previous/Next pg button – press to turn to the previous /next page 9. Earphone jack 10. Mini USB jack – for data transfer and emergency charging 11. SD card slot – supports SD card 12. Built-in Speaker Power On and Off the Reader • Press and hold the [Power] button for 3 seconds to turn on/off the reader.
Getting Started 4 Inserting Memory Card The Reader supports SD card in both FAT and NTFS file system. NTFS is needed to copy files larger than 4GB in size. To insert a Memory card: • Check ifthe TF card is in the correct position with the contact pins facing upwards as illustrated below. You may damage the card and the reader if TF card is not inserted in the correct position. • Push the TF card into the card slot until it clicks. • To remove the TF card, push the TF card once again until it clicks.
Getting Started 5 Starting from the home screen When the Reader is turned on, you will enter the home screen. • • • • • • • • • • • • • • • • 1. Continue Reading -displays the page of the last read book. Press the button to open the last read page. Library 2. Library -displays the list of books Indicator available. Battery Move the cursor to desired book and press the button to open Pageit. Number 3. Battery Indicator -displays Time the &battery Date during operation. status 4.
Getting Started 6 Entering the Home Menu To access extra functions available, press the [Menu] button to display the Home Menu as illustrated. Press the directional key to move the cursor to desired item. The selected item will be highlighted in dark. Press to choose the item. To exit the menu, move the cursor to and press to confirm. Alternatively, press the button to exit.
Importing Content 7 Importing Content • The reader supports USB Mass Storage Device function. • To import content (eBooks, video, audio, photo etc) into the reader, connect the reader to a PC using the supplied USB cable. • Upon successful connection to the PC, roll the Directional down to move cursor and press the OK button to select “Data”. The reader will enter USB mode and the present operation will be halted. • Go to [My Computer] on your PC, double click on the reader’s diskdrive to open it.
Importing and Transferring Content 8 Authorizing PC and Reader • Upon registration, return to the ADE window. Enter the username and password to activate your Adobe account. • After activation, connect the Reader to the PC. ADE will detect the Reader and you are prompted to authorize the device. • After authorization, you will be able to find the reader recognized in ADE as below. Contents inside the reader will be displayed on the right hand windows.
Notes in using ADE 9 Each ADE ID supports only 6 devices, this includes the master device (the reader) and the slave device (TF card). When the reader is restored to default settings, ALL DRM activation records and data (including DRM books you have purchased) will be erased from the reader! You are required to authorize the device with your ADE ID again.
Reading Books 10 Opening Book • eBooks transferred to the reader will be listed in the Home Menu. • The reader supports eBooks in epub, pdf and txt format. • Use the buttons to move the cursor to select a book and press to open it. Book Page Interface Current Page / Total Page Remaining Battery Life Font Size Turning book page • On reading page, press or button to turn to the next page.
Reading Books 11 Adjusting Font Size • While reading a page, press the button to enter the font size menu. • There a 5 font sizes available: Small, Medium, Large, XLarge, XXLarge. • Move the cursor to the desired font size then press to confirm. • It may take some time for the fonts to be resized. Zooming In/Out • You will need to use the zoom function to enlarge images available in the eBook (epub & pdf file only). • From the size menu, select [Enlarge]. • The zoom menu will appear.
Reading Books 12 Using Option Menu in Reading In Reading page, press
Reading Books 13 Read from Bookmarks in Home Menu • From Home Menu, press
Reading Books 14 Auto Flip You can set the Reader to [Auto Flip] mode. The auto flip durations which are available are: OFF, 5s, 10s, 20s, 30s, 40s, 50s, 1 min. Book Information You can check the information of the current book from the [Book Information] option. This will show: Title, Author, Publisher, File Type, Date added, File size, Publisher and Expiration Date. The displayed information depends on the source you downloaded/purchasedthe eBook from.Some of the information may not be available.
15 Reading Books Display Settings • To adjust the font color, background color and brightness during reading. • NOTE: Changing font color and background color is only applicable to txt and epub documents. Add to Favorite List • You can add books to your Favorite List. In the
Playing Audio File Music Player • From Home screen, press
Playing Video File 17 • From the Home screen, open the Home menu and select
Viewing Picture 18 Gentle Reminder: Please organize the pictures into a specific folder for easy navigation. • From the Home screen, press
File Explorer 19 • From the Home screen, press
Settings 20 Time & Date To set the clock and date Press buttons to move the cursor. Press buttons to input value. Time zone setting is needed to calculate the correct duration for book borrowing / returning. Device Standby • To enable / disable auto standby mode. • Press the button to manually set the reader to standby mode. • Press the button once to wake up the reader from standby mode.
Troubleshooting 21 If the reader does not function as expected, please try the following steps. The Reader is not responding or can’t be turned on. • Reset the reader by pressing and holding the power button for 6 seconds. The reader will be forced to shut down if it is on and you will be able to restart the reader again. • The battery has been fully discharged. Please charge the reader using the USB cable or the USB AC Adapter. Battery Life seems short • The operating temperature is below 5oC.
Precautions and Maintenance 22 On Battery • • Charge the battery only in the temperature that ranges from 0 to 35 degrees Celsius. Do not charge the reader if the battery is found damaged or leaking. On Operation • Never subject the reader to extremes of light, temperature, moisture or vibration. • Never wrap the reader in anything when it is being used or charged. Heat may built up in the reader while charging or if it used for an extended period of time.
23 Precautions and Maintenance . On TF card • If the reader does not respond after inserting a Micro SD card, please take it out and insert it again. • Do not remove the Micro SD card or turn off the reader during data writing or reading to prevent damage to the data and to the reader. • Make sure the Micro SD card is unlocked before writing or deleting data. • Backup your files and data before formatting the Micro SD card. Please format the card in FAT.
Product Specifications 24 Display 9 inch TFT-LCD Display, 800x480 pixels Brightness: 250cd/m2 Storage memory Built in memory: 16GB Supports Micro SD cards up to 16GB (FAT & NTFS format) Media File Format supported eBook: EPUB, PDF, TXT,FB2,PDB,HTML Audio: MP3, WMA, AAC, WAV, OGG Photo: jpg, bmp, gif Video: MPEG-1, MPEG-2, MPEG-4(Xvid), Divx, H.263, H.264, RM/ RMVB, MKV, MOV, VOB, FLV, WMV 7 (v1), WMV 9(v3), WMV 9AP(vc-1) Connectivity Data transfer: USB 2.0 High Speed Audio: 3.
Copyrights and Trademark Notice 25 Copyright laws prohibit copying the data of this product or the contents of this manual (illustrations, related documents, etc.) in whole or in part without the permission of the copyright holder. Additionally, use of the data of this product or the contents of this manual is not allowed without vendor’s permission except for personal use.
26 Contains Reader® Mobile technology by Adobe Systems Incorporated This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries.
