Compatibility information iPod tower 1 USER MANUAL For information and support, www.lenco.
FOREWORD BASE PLATE INSTALLATION THANKS (INSTALLATION SKETCH MAP) (DESIGN SKETCH) Dear Customer, May we take this opportunity to thank you for purchasing this player. We strongly recommend that you carefully read the User Manual before attempting to operate the unit and that you note the listed precautions. 1. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation. 2.
RADIO OPERATION WARNING 1. Enter FM Function In the turn-on or playing status, press the FM button on the remote control to enter FM mode. Please read and understand all the warnings given in the following and those marked on the unit. This unit has been designed and manufactured to assure personal safety. 2. Select Bands 1) Directly input frequency: press the T/F button on the remote control, then input the frequency that you want. The range of FM frequency is from 87.50MHz to 108.00 MHz.
BASIC OPERATION PANELS USB/DIGITAL CARD 5 4 It is possible to listen to audio files using the USB or CARD interface of this unit. 1. FAST REWIND/FAST FORWARD BUTTONS 1 8 2 3 9 2. AUDIO INPUT BUTTON 3. SLEEP BUTTON 10 4. IPOD INTERFACE 6 7 5. STANDBY BUTTON 6. PLAY/PAUSE BUTTON 1. Connect the USB device or CARD with this unit. 2. Press the USB/SD button on the remote control to play the USB or CARD. Press USB/SD button again to switch between USB and CARD modes. 3.
BASIC OPERATION REMOTE CONTROL MENU BUTTON While playing the IPOD, press the MENU button to return the main menu status. DIRECTION BUTTONS While playing the IPOD, press the Direction buttons to select the item you want. to move the cursor IPOD, AUDIO, FM BUTTONS 1) Connect the iPod with this unit, then press IPOD button on the remote control to enter the iPod mode. Remark: Never connect your iPod to the iPod Tower without using the correct bracket. 2) Correctly connect audio facility (eg.
SYSTEM CONNECTION BASIC OPERATION Before connecting acoustic equipment, pay attention to the picture below. Each connection must be safe and firm. Disconnect power cable until you have finished all the connections. PREPARATION 1) Before the unit is turned on, please check if all the connections are right and safe. Then connect the main power. 2) Press the POWER ON/OFF button on the back panel to turn on the main power.
