Instruction manual

HIGH POWER SPEAKER

WITH iPod/iPhone DOCKING STATION,

FM PLL RADIO & CARDSLOT

MODEL: IPT-2

INSTRUCTION MANUAL

Please read these instructions while operating your unit.

Manufacturer of this unit follows a principle of constant improvement and is not held

responsible for any changes that are made to the unit nor accepts any liabilities

for these changes. Thanks for your choice of our products.

For information and support, www.lenco.eu

18 18

PAGE 1
3 INSTRUCTION MANUAL HIGH POWER SPEAKER WITH iPod/iPhone DOCKING STATION, FM PLL RADIO & CARDSLOT MODEL: IPT-2 6 7 8 11 1 4 2 5 12 14 15 9 10 17 13 16 19 20 21 22 23 Please read these instructions while operating your unit. Manufacturer of this unit follows a principle of constant improvement and is not held responsible for any changes that are made to the unit nor accepts any liabilities for these changes. Thanks for your choice of our products. For information and support, www.lenco.
PAGE 2
1 12 2 3 4 5 6 13 7 16 14 15 8 POWER SUPPLY Plug one end of the AC cord into the AC socket on the unit, then plug the other end into the AC wall outlet. SLEEP FUNCTION Press a SLEEP button on the remote in power on mode. Each time SLEEP button is pressed, the LCD display changes Sleep time in a sequence as follows: 90 80 70 60 50 40 30 20 10 off The player goes to standby mode in the moment playback or broadcasting reaches the set Sleep time. 17 18 19 9 20 21 22 23 10 11 MAIN UNIT 1.
PAGE 3
SAVING FM RADIO STATIONS TO THE UNIT'S MEMORY 1. After tuning the FM radio to the desired stations, press STORE button until "MEM" is shown on the LCD display with a flashing number of a memory cell. 2. Press the M+/ M- button on the remote or press PRESET UP/DOWN button on the unit to select the radio memory cell. 3. Press STORE button again to save the current radio station to the selected memory cell. 4.