INSTRUCTION MANUAL USB direct recording turntable MODEL: L-85 Please read and follow these instructions before using your unit. www.lenco.
Safety instructions.............................................................................. 3 Assembly ............................................................................................ 6 Description ......................................................................................... 7 Mains connection ............................................................................... 9 Amplifier connection ..........................................................................
Safety instructions IMPORTANT SAFETY INSTRUCTIONS ‐ READ CAREFULLY BEFORE USE. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT AN ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING. This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this tablet.
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products. Avoid using the device near strong magnetic fields. ESD can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment. Safety instructions - continued WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH THE VENTS OR OPENINGS.
To protect the device during a thunderstorm, unplug the AC power adaptor When the device is not in use for long periods, unplug the AC power adaptor for safety reasons. To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
Assembly Drive belt: The belt and turntable platter have been installed properly at factory, but the belt may be loose during transportation. If so, the following procedures will be taken for belt installation by yourself. A. Remove the rubber mat from the turntable platter and the E ring from the turntable shaft, then release the turntable platter from the shaft B. Put the drive belt on the inner rim of the turntable platter and pull it through the hole C.
Description 7
1. Adaptor: Use this adaptor when playing 45 RPM records. 2. Platter: Place a record here to play. 3. 33/45 RPM Switch: Switch 33 or 45 rpm for playing a record at a correct speed. 4. REC: Press it to enter into record mode. 5. SPLIT For stopping the current recording, forming a record file manually and then going on recording the next track. 6. Pick-up arm stand 7. Pick-up Arm Lift Stick: To raise up and down the Pick-up Arm and cue at a proper place of a vinyl. 8.
USB storage device is plugged in -> LED flashes When the system is ready to record. -> LED light is on Press REC button to start recording. -> LED blinks slowly. Press SPLIT button to create new file in the recording. Press REC button again to stop recording. -> LED is flashing for a short time, then LED light is stably on again. Note: Do not remove the USB storage device if the LED is flashing.
Distortion: 3%~4% S/N: 50 dB Audio Output Voltage: 500mV ±200mV USB: 5V/500 mA Service and support For information: For support: www.lenco.com http://lencosupport.zendesk.com Lenco helpdesk: Germany The Netherlands Belgium France 0900-1520530 (Local charges) 0900-23553626 (Local charges + 1ct p/min) 02-6200115 (Local charges) 03-81484280 (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive) Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. The declaration of conformity may be consulted at https://lencosupport.zendesk.