Model: LBT-120BK User manual - Turntable with Bluetooth and USB direct encoding Gebruikshandleiding - Platenspeler met Bluetooth en USB voor directe codering Benutzerhandbuch – Plattenspieler mit Bluetooth und direkter USB-Aufnahme Mode d'emploi - Tourne-disque avec Bluetooth et encodage direct en USB Manual de usuario - Tocadiscos con Bluetooth y codificación directa USB 1
Index English.............................................................................................................................................. 3 Nederlands .................................................................................................................................... 10 Deutsch .......................................................................................................................................... 17 Français ................................................
English LBT-120BK CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel. PRECAUTIONS BEFORE USE KEEP THESE INSTRUCTIONS IN MIND: 1. Do not use this device near water. 2. Clean only with a slightly damp cloth. 3. Do not cover or block any ventilation openings.
27. * To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus. 28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 29. Attention should be drawn to the environmental aspects of battery disposal. 30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided. 31.
Information for power adaptor Power supply adaptor - Manufacturer: Blue Iron - Model number: BI12T-120100-I - Adaptor type: External AC adaptor - Use only the power supply listed in the user instructions Assembly Drive belt: The belt and turntable platter have been installed properly at factory, but the belt may be loose during transportation. If so, the following procedures will be taken for belt installation by yourself. A.
Description 1. Adaptor: Use this adaptor when playing 45 RPM records. 2. Platter: Place a record here to play. 3. 33/45 RPM Switch: Switch 33 or 45 rpm for playing a record at a correct speed.
4. REC: Press it to enter into record mode. 5. SPLIT/PAIR (BLUETOOTH) Split function: For stopping the current recording, forming a record file manually and then going on recording the next track. Pair function: Press this button until the LED indicator starts flashing blue, then put your Bluetooth speaker or headphone into pairing mode. Then this turntable will connect with the Bluetooth speaker or headphone automatically and the LED indicator will be blue without flashing after the connection is made.
- Press REC button again to stop recording. -> LED is flashing for a short time, then LED light is on again. Note: Do not remove the USB storage device if the LED is flashing. Mains connection Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit is ready to be connected to a correct voltage of your location. Amplifier connection Connect RCA line out cable (10) to the AUX input on your amplifier: - Red plug into R channel input.
Guarantee Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use.
Nederlands LBT-120BK LET OP: Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd in deze documentatie kan leiden tot blootstelling aan schadelijke straling. Dit apparaat dient uitsluitend te worden aangepast of gerepareerd door gekwalificeerd onderhoudspersoneel. VOORZORGSMAATREGELEN VOOR GEBRUIK ONTHOUD DE VOLGENDE INSTRUCTIES: 1. Gebruik dit apparaat niet in de buurt van water. 2. Reinig het uitsluitend met een licht vochtige doek. 3.
22. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen. 23. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt door storing, misbruik, modificatie van het apparaat of batterijvervanging. 24. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden overdraagt.
Informatie over de voedingsadapter Voedingsadapter - Fabrikant: Blue Iron - Modelnummer: BI12T-120100-I - Soort adapter: Externe AC-adapter - Gebruik uitsluitend de lichtnetdapter die in de gebruiksaanwijzing wordt vermeld Montage Aandrijfriem: De riem en het draaiplateau zijn in de fabriek juist geïnstalleerd, maar de riem kan tijdens het transport losraken. In dat geval moet u de volgende procedures volgen voor de installatie van de riem. A.
2. Til de toonarm handmatig op en plaats deze op het lege gedeelte aan het einde van de langspeelplaat. 3. Het mechanisme van de functie Auto Return zal juist worden aangepast en de toonarm keert automatisch terug naar de armsteun.
1. Adapter: Gebruik deze adapter voor het afspelen van 45-toerenplaten. 2. Plateau: Plaats hier een plaat om af te spelen. 3. 33/45 TPM-schakelaar: Schakel naar 33 of 45-toeren voor het afspelen van een plaat met de juiste snelheid. 4. OPNAME/MP3 codering: Druk erop om naar de opnamemodus te gaan. 5. SPLITSEN/KOPPELEN (BLUETOOTH) Splits-functie: Voor het stoppen van de huidige opname, het handmatig vormen van een opnamebestand en vervolgens doorgaan met het opnemen van de volgende track.
. LED - USB-opname en LED-signaalindicatie - USB-opslagapparaat is niet aangesloten. -> LED-lampje is uit - USB-opslagapparaat is aangesloten -> LED knippert - Als het systeem gereed is om op te nemen. -> LED-lampje is aan - Druk op de knop REC om de opname te starten. -> LED knippert langzaam. - Druk op de knop SPLIT om een nieuw bestand te maken in de opname. - Druk nogmaals op de knop REC om het opnemen te stoppen. -> LED knippert korte tijd en vervolgens brandt het LED-lampje weer.
Stof de naald van tijd tot tijd af met een zeer fijn borsteltje en een klein beetje alcohol (borstel van achter naar voren over het patroon). Garantie Lenco biedt service en garantie aan overeenkomstig met de Europese wetgeving. Dit houdt in dat u, in het geval van reparaties (zowel tijdens als na de garantieperiode), uw lokale handelaar moet contacteren. Belangrijke opmerking: het is niet mogelijk om producten die moeten worden gerepareerd rechtstreeks naar Lenco te sturen.
Deutsch LBT-120BK ACHTUNG: Die zweckentfremdete Bedienung, Benutzung oder Einstellung der Prozeduren kann zu gefährlichen Unfällen durch Strahlen führen. Dieses Gerät darf außer von qualifizierten Fachleuten von niemand anderem repariert oder eingestellt werden. VORSICHTSMASSNAHMEN VOR DER BENUTZUNG BEFOLGEN SIE IMMER FOLGENDE ANWEISUNGEN: 1. Benutzen Sie das Gerät nicht in der Nähe von Wasser. 2. Benutzen Sie zur Reinigung ein nur leicht befeuchtetes Tuch. 3. Blockieren Sie keine Lüftungsöffnungen.
oder Modifikation des Geräts oder durch Wechseln der Batterien. 24. Unterbrechen Sie die Verbindung nicht während einer Formatierung oder einer Datenübertragung. Bei Unterbrechung drohen Datenverlust und Datenbeschädigung. 25. Wenn das Gerät eine USB-Wiedergabefunktion besitzt, dann stecken Sie den USB-Stick direkt in das Gerät. Verwenden Sie kein USB-Verlängerungskabel, weil die erhöhte Störanfälligkeit zu Datenverlust führen könnte. 26.
Daten des Netzadapters Netzteiladapter - Hersteller: Blue Iron - Modellnummer: BI12T-120100-I - Adaptertyp: Externes Steckernetzteil - Verwenden Sie nur die im Handbuch angegebene Stromversorgung Zusammenbau Antriebsriemen: Der Riemen und der Plattenteller wurden werksseitig ordnungsgemäß installiert, aber der Riemen kann sich beim Transport lockern. Falls dies der Fall ist, führen Sie mit folgenden Verfahren die Installation des Riemens selbst durch. A.
1. Legen Sie eine Schallplatte auf den Plattenteller und geben Sie sie wieder. 2. Heben Sie den Tonarm mit dem Tonarmlift manuell an und senken Sie im leeren Bereich am Ende der Schallplatte ab. 3. Der Mechanismus der automatischen Rückkehrfunktion wird ordnungsgemäß eingestellt und der Tonarm kehrt automatisch zur Tonarmstütze zurück.
1. Adapter: Verwenden Sie diesen Adapter zum Abspielen von Schallplatten mit einer Drehzahl von 45 U/min. 2. Plattenteller: Platzieren Sie hier eine Schallplatte zum Abspielen. 3. 33/45-U/min-Umschalter: Stellen Sie für die Wiedergabe einer Schallplatte mit der richtigen Geschwindigkeit 33 oder 45 U/min ein. 4. REC: Rufen Sie mit der Taste den Aufnahmemodus auf. 5.
14. Abbrechen Lässt den Tonarm direkt zur Tonarmstütze zurückkehren. 15. LED - USB-Aufnahmevorgang und LED-Statusanzeige. - USB-Speichergerät wurde nicht angeschlossen. -> die LED leuchtet nicht. - USB-Speichergerät wurde angeschlossen -> die LED blinkt. - Das System ist aufnahmebereit. -> die LED leuchtet. - Starten Sie die Aufnahme mit der REC-Taste. -> die LED blinkt langsam. - Drücken Sie die SPLIT-Taste, um ein neue Aufnahmedatei zu erstellen.
* WICHTIGE EMPFEHLUNGEN Wir empfehlen Ihnen, dass Sie für ein dauerhaftes und maximales Musikerlebnis Ihre Schallplatten mit einem Tuch reinigen, das mit einem antistatischen Produkt imprägniert wurde. Wir möchten Sie aus selben Grund darauf hinweisen, dass Ihre Tonabnehmernadel regelmäßig (ungefähr alle 250 Stunden) gewechselt werden sollten.
Français LBT-120BK ATTENTION : L’utilisation de commandes ou de réglages ou l’exécution de procédures autres que ceux spécifiés dans ce manuel peut entraîner une exposition à des rayonnements dangereux. Cet appareil ne doit pas être réglé ou réparé par quiconque d’autre que du personnel qualifié. PRÉCAUTIONS AVANT UTILISATION GARDEZ CES INSTRUCTIONS À L’ESPRIT : 1. N’utilisez pas cet appareil près de l’eau. 2. Nettoyez-le uniquement avec un chiffon doux légèrement humide. 3.
23. Le fournisseur n’est pas responsable des dommages ou pertes de données causés par un dysfonctionnement, une utilisation abusive, une modification de l’appareil ou un remplacement des piles. 24. N’interrompez pas la connexion lorsque l’appareil formate ou transfère des fichiers. Sinon, les données pourraient être endommagées ou perdues. 25. Si l'appareil a une fonction de lecture USB, il faut brancher la clé USB directement sur l’appareil.
Informations concernant l'adaptateur d'alimentation Adaptateur de puissance - Fabricant : Blue Iron - Numéro du modèle : BI12T-120100-I - Type d’adaptateur : Adaptateur externe AC - Utilisez uniquement l’alimentation électrique indiquée dans le mode d’emploi Montage Courroie d'entrainement : La courroie et le plateau du tourne-disque ont été correctement installés en usine, mais la courroie peut s'être détendue pendant le transport.
1. Placer un disque sur le plateau et le lire. 2. Lever manuellement le bras et le placer sur la partie lisse à la fin du disque. 3. le mécanisme de retour automatique s'ajustera correctement et le bras retournera automatiquement sur le support de bras.
1. Adaptateur : Utiliser cet adaptateur pour lire des disque 45 tours. 2. Plateau : Placer un disque et lire. 3. Commutateur 33 / 45 tours : Commuter sur 33 ou 45 tours pour lire le disque à la vitesse correcte. 4. Enregistrement/Encodage MP3 : Appuyer dessus poue entrer en mode d'enregistrement. 5. SPLIT/PAIR (BLUETOOTH) Fonction Split : Pour arrêter le disque en cours, former manuellement un fichier d'enregistrement puis aller sur le morceau suivant.
- L'appareil de stockage USB n'est pas branché. -> La LED est éteinte - L'appareil de stockage USB est branché -> La LED clignote - Quand le système est prêt à enregistrer. -> La LED est allumée - Appuyer sur REC pour commencer l'enregistrement. -> La LED clignote lentement. - Appuyer sur SPLIT pour créer un nouveau fichier d'enregistrement. - Appuyer à nouveau sur REC pour arrêter l'enregistrement. -> La LED clignote pendant un court instant, puis elle reste allumée.
Garantie Lenco propose un service et une garantie conformément à la législation européenne, ce qui signifie qu’en cas de besoin de réparation (aussi bien pendant et après la période de garantie), vous pouvez contacter votre revendeur le plus proche. Remarque importante : Il n’est pas possible de renvoyer l’appareil pour réparation directement à Lenco. Remarque importante : Si l’unité est ouverte ou modifiée de quelque manière que ce soit par un réparateur non agréé, la garantie serait caduque.
Español LBT-120BK PRECAUCIÓN: El uso de los controles o ajustes o el funcionamiento de los procedimientos excepto a aquellos especificados aquí pueden provocar una exposición peligrosa a la radiación. Esta unidad no debe ajustarse o repararse por ninguna persona salvo personal de servicio cualificado. PRECAUCIONES PREVIAS AL USO TENGA ESTAS INSTRUCCIONES EN MENTE: 1. No use este dispositivo cerca del agua. 2. Límpielo únicamente con un paño ligeramente humedecido. 3.
25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. Si la unidad dispone de función de reproducción USB, se debe conectar la memoria USB directamente en la unidad. No use un cable de extensión USB ya que puede causar interferencias lo que puede provocar un fallo en los datos. El aparato no debe exponerse a goteos o salpicaduras y asegúrese de que ningún objeto lleno de líquido, como jarrones, se colocan sobre o cerca del aparato.
Información del adaptador de alimentación Adaptador de alimentación - Fabricante: Blue Iron - Número de modelo: BI12T-120100-I - Tipo de adaptador: Adaptador CA externo - Utilice únicamente la fuente de alimentación indicada en las instrucciones de uso Montaje Correa: La correa y el plato se han instalado debidamente en fábrica, pero la correa puede aflojarse durante el transporte. En tal caso, se deben seguir los siguientes procedimientos para que usted mismo instale la correa. A.
1. Coloque un disco en el plato y reprodúzcalo. 2. Baje manualmente el brazo y colóquelo sobre la parte vacía del final del disco. 3. El mecanismo de la función de vuelta automática se ajustará debidamente y el brazo volverá automáticamente a su soporte.
1. Adaptador: Use este adaptador cuando reproduzca discos de 45 RPM. 2. Plato: Coloque aquíel disco para reproducirlo. 3. Interruptor de 33/45 rpm: Cambia a 33 o 45 rpm para reproducir un disco a la velocidad correcta. 4. Grabacion en MP3: Púlselo para entrar en el modo de grabación. 5. DIVIDIR/EMPAREJAR (BLUETOOTH) Función de división: Para detener la grabación actual, crear un archivo de disco manualmente y después continuar grabando la siguiente pista.
- El dispositivo de almacenamiento USB no está conectado. -> La luz LED está apagada - El dispositivo de almacenamiento USB está conectado -> La luz LED parpadea - Cuando el sistema está listo para grabar. -> La luz LED está encendida - Pulse el botón REC para iniciar la grabación. -> La luz LED parpadea lentamente. - Pulse el botón SPLIT para crear un nuevo archivo en la grabación. - Vuelva a pulsar el botón REC para detener la grabación.
Garantía Lenco ofrece servicio y garantía en cumplimiento con las leyes de la Unión Europea, lo cual implica que, en caso de que su producto precise ser reparado (tanto durante como después del periodo de garantía), deberá contactar directamente con su distribuidor. Nota importante: No es posible enviar sus reparaciones directamente a Lenco. Nota importante: Si la unidad es abierta por un centro de servicio no oficial, la garantía quedará anulada. Este aparato no es adecuado para el uso profesional.