DVD MICRO HI-FI SYSTEM WITH USB & SD/MMC MDV-8 For information and support, www.lenco.
Table of Content Table of Content 1 Safety Information 2 Locations and function of the player 3 Connection 6 Remote Control 9 DVD Operation 12 Radio Operation 22 Troubleshooting 24 Specification 25 Dear Customer: Thank you for purchasing this DVD MICRO HI-FI SYSTEM WITH USB & SD/MMC. When opening the box for the first time, please check whether all the accessories are present.
Safety In formation The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Locations and Function of the Player Front Panel 6. /AUTO 8. /FM/AM 9. CARD READER interface 10. USB interface 1. POWER 2. / 7. VOLUME knob 3. Stop button 4. /CHANNEL- button 5. /CHANNEL+ button Notes: □ Use the FUNCTION button to select the proper input signal source. The sequence is DVD —> Radio —>AUX 1 IN—> AUX 2 IN. The DVD operation includes the source for USB and CARD. When in DVD mode, you can press FUNCTION button on the remote control to select USB or CARD signal source.
Locations and Function of the Player Playback Content from USB or CARD This unit has a USB/SD interface, you can insert a USB device or an SD card with USB/SD Interface to play the audio/video files and JPEG files. All the function is the same with the DISC operation. You can switch between the DVD/USB/SD function by pressing the FUNCTION button. The unit starts to read the table of content (TOC) of the storage and displays the results into the file browser.
Locations and Function of the Playe Rear Panel 8 9 Elements of the rear side 1. 2. 3. 4. 5. 6. 7. 8. 9.
Connection Connecting to TV/Amplifier T o T V c o mp o s i t e AUDI O / VI DEO IN PUT jacks 6
Connection Connecting the Speakers P lace t he Spea ke rs For the best result, please arrange the two speakers as shown in the following picture: Align the speakers vertically at the ear level and at a horizontally angle of 45 degrees to the primary listening area. 1. 2. 3. 4. Position of the unit and the TV set. Left speaker Right speaker Position to enjoy sound and video C on nec t t he Spea ke rs 1.Please make sure, that the power is turned off and is not connected to the power outlet. 2.
Connection Connecting Antennas Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimum reception. AM indoor loop antenna Connec t the AM Antenna 1. 2. 3. ※ Open cable terminal by pressing back on tab Insert wire end Release tab; make sure wire is in terminal securely. Position the antenna as far as possible form a TV, VCR or other radiation source.
Remote Control Insert batteries and Operation radius Remove the battery cover on the back side of the remote control to place the batteries. Remove battery during storage or when you are not using the DVD player for a long time. Notes: 1. 2. 3. 4. 5. 6. Weak batteries can leak and several damage by the remote control. Leaking out battery acid can damage your health.
Remote Control 10
Remote Control Buttons of the Remote Control: 1. POWER button: press to turn on or off the unit. 2. EQ button: press to select different audio modes, such as NORMAL, CLASSIC, POP, JAZZ, ROCK and VOCAL. 3. FUNCTION button: press to select the different mode, such as DVD, radio, AUX 1 in and AUX 2 in. 4. Numeric buttons (0-9, 10+): press to input number to select the track or channel. 5. OPEN/CLOSE button: press to open/close the disc tray. 6. SUBTITLE button: press to select the subtitle language. 7.
DVD Operation ※ ※ ※ DVD VIDEO MENU PLAY When playing a DVD disc in the DVD player: 1) The disc will be played automatically and stop at menu picture. Use / , / cursor buttons on the remote control to move between the highlight bars in the menu. 2) Press ENTER button on the remote control to confirm the selected item. 3) You can press TITLE button on the remote control to return to the title of the DVD disc.
DVD Operation 1) Item: TT Function: Display the current title number and total title number. 2) Item: CH Function: Display the current chapter number and total chapter number. 3) Item: (This icon only displayed for several seconds, after several seconds it will disappeared.) 4) 5) 6) 7) 8) ※ Function: Display the played time of the current chapter. C-: Display the remaining time of the current chapter. T: Display the played time of the current title. T-: Display the remaining time of the current title.
DVD Operation ※ SPECIAL FUNCTIONS FOR DVD Multi-subtitle Language Function Press SUBTITLE on the remote control during playback. The corresponding information will be shown on the screen. Each time the button is pressed, the subtitle language changes in sequential order. Notes: - The language number is different according to the disc. Some discs only contain one subtitle language. Multi-audio Language Function Press AUDIO on the remote control during playback.
DVD Operation 2) Use / , / cursor buttons to select the items you want to program. The items you selected will become highlight. 3) Input the sequence number you want to program by numeric buttons (0-9) on the remote control. 4) Use cursor buttons to select PLAY character, then press ENTER button on remote control to confirm. The unit will play the tracks you programmed.
DVD Operation TV SYSTEM According to the color system of the TV, you can choose the TV system. * AUTO: Choose this setting if your DVD player is connected to a multi-system TV. *NTSC: Choose this setting if your DVD player is connected to a NTSC TV. * PAL: Choose this setting if your DVD player is connected to a PAL TV.
DVD Operation VIDEO Set the video mode TV TYPE *4:3PS (Pan&Scan): Choose this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won't be seen. *4:3LB (Letter Box): Choose this setting if your DVD player is connected to a normal ratio TV, connector you will see the movies in their original aspect ratio (height-to-width ratio).
DVD Operation PASSWORD The password option is initialized locked, and you cannot set the ratings limit or change the password in order for the Ratings feature work, the password mode must be turned on. If you want to set the ratings limit, you will need to enter the default password, which is 0000, and then press ENTER to confirm. To change the password, you will be prompted for the old password, then be prompted for a new one, entering a 4 digital number (this is your password).
DVD Operation 2) LANGUAGE SETUP The language setup page is displayed as below: *OSD LANGUAGE: you can select the OSD language among: ENGLISH, SPANISH, FRENCH and ITALIAN. *AUDIO LANG: you can select the default AUDIO language among: ENGLISH, FRENCH, SPANISH, ITALIAN. *SUBTITLE LANG: you can select the default SUBTITLE language among: ENGLISH, FRENCH, SPANISH, ITALIAN. *MENU LANG: you can select the default MENU language among: ENGLISH, FRENCH, ITALIAN, SPANISH.
DVD Operation KEY Use the / buttons to adjust the tone among a certain range. 4) VIDEO SETUP The video setup page is displayed as below: Use the / buttons on the remote control to adjust the value of the BRIGHTNESS, CONTRAST, HUE, SATURATION and SHARPNESS among a certain range.
DVD Operation 6) DIGITAL SETUP The digital setup page is displayed as below: DYNAMIC RANGE DYNAMIC RANGE: Choose this setting to adjust the line out ratio and get different effect, If adjusting to FULL, the audio signal peak value will be the minimum, while adjusting to OFF, maximum. DUAL MONO Choose this option to set the L and R mono output mode, there are four modes in this option: STEREO, MONO L, MONO R and MIX MONO, it is mainly used in Karaoke mode.
Radio Operation With the unit you can listen radio by using the FM/AM Radio Tuner. Please connect the player to the antenna. How to change to the Radio mode? Press the FUNCTION button to select the radio mode. Then use the FM/AM button to switch between FM or AM band. If you use the first time the Radio, you should start to search the Radio stations. AUTO SEARCH Press the SEARCH button on the remote control or AUTO button on the main unit to start the searching automatically.
Troubleshooting FOR DVD Symptom Correction No power Check if AC adapter of power is connected securely. Switch the device On by pressing the power button. No sound Ensure that the equipment is connected properly Ensure that the input settings for the TV and stereo system are proper. Please make sure, that the audio track exists on the disc. Control the volume. No key operation Turn the unit off and then back to on. Disconnect the unit from power and from battery and connect them again.
Troubleshooting FOR RADIO No Signal 1. Please check if unit is in Radio mode? If not please switch to this mode. Please press the FUNCTION button until RADIO appears on the screen. 2. Please make sure, that you receive really analogue Radio signals. Bad reception quality? 1. Please, align your antenna optimally. Use an antenna with active amplifier (house antenna or roof antenna). If you have moved the unit, adjust the antenna again or connect an active antenna. 2.
Specification General Power AC: Power consumption: Radio Tuner Frequency S/N Ratio Monophonic DVD-Player TV System Resolution Ratio Video S/N Ratio Frequency Response Audio S/N Ratio Degree of Distortion D/A Converter Video Out S-Video Out Y: S-Video Out C: AC 100-240V 50/60 Hz 65 W FM 87.5 - 108MHz AM 522-1620KHz > 46 dB > 46 dB NTSC/PAL Greater Than 500 lines 65 dB 96 kHz /24bit 4 Hz - 44 kHz +/-2 dB 95 dB <0.01% 192 kHz / 24 bit 1 V p-p 1 V p-p (75) 0.