Operating Manual PORTABLE LCD DVD PLAYER Model: MES-202 READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING. PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE. THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. For information and support, www.lenco.
TABLE OF CONTENTS IN THE BOX .................................................................................................................................................................................. 2 OVERVIEW OF THE DVD PLAYER .............................................................................................................................................. 3 SLAVE SCREEN......................................................................................................................
IN THE BOX You should have the following items in the packaging: Main Portable DVD player / Screen Unit Slave Screen Cigarette Lighter Plug 1PC 1PC 1PC MUTE SCREEN ON/OFF BRI/COL TITLE MENU SETUP STOP DISPLAY USB/SD/ MMC CARD OK PLAY/PAUSE SUBTITLE 1 2 3 4 5 6 7 8 9 AUDIO SEARCH PROGRAM ANGLE ZOOM 0 REPEAT SLOW VOLUME AV Cable Slave Screen Power Connector Cable Remote Control (with 2 “AAA” batteries) 1PC 1PC 1PC Carry Bag Vehicle Headrest Attachment Strap Instruction
OVERVIEW OF THE DVD PLAYER: 1. TFT SCREEN 2. LEFT & RIGHT SPEAKERS 3. PLAY/PAUSE BUTTON 4. STOP BUTTON 5. PREVIOUS & F.BWD BUTTON 6. NEXT & F.FWD BUTTON 7. SETUP BUTTON 8. SUBTITLE BUTTON 9. VOL- BUTTON 10. VOL+ BUTTON 11. REMOTE SENSOR 12. DC 9V IN & CAR PLUG 12V IN SOCKET 13. CHARGE INDICATOR 14. POWER ON/OFF SWITCH 15. POWER INDICATOR 16. VIDEO/AUDIO OUT SOCKET 17. SD/MMC CARD SLOT 18. USB PORT 19. PHONES JACK 20.
BASIC CONNECTION Â y y y y y Mains plug or appliance connector shall be used as the disconnect device, so mains plug or appliance connector should always remain readily operable. It is recommended to connect a multi-system TV. Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC power cords before commencing connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
OPERATIONS CHANGING AUDIO SOUNDTRACK LANGUAGE (DVD) It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings (This operation works only with discs on which multiple audio soundtrack languages are recorded). Press AUDIO button during DVD disc play, the sound track language changes with the current sound track number shown on the TV screen. NOTE: When no soundtrack languages are recorded, pressing this button will not work.
MP3/MP4 PLAYBACK 1. Load the MP3/MP4 disc onto the disc tray and the TV screen will show all its folders after a few seconds. 2. Select the folder you want by the navigation buttons and then OK/ENTER button to confirm. 3. The files in this folder are displayed and select your favourable song via navigation buttons and press OK/ENTER button to start playback. 4. Press NEXT and PREV button to select track directly. 5. Press REPEAT button to change play mode. 1.
EXTERNAL MEMORY MEDIA OPERATION (USB &SD/MMC CARD) Prepare the player for External Memory media operation 1. Slide the POWER switch to ON position, plug a USB memory stick filled with Audio/video files into the USB port or insert the SD/MMC card into the card slot, the USB or the SD/MMC card is successfully detected and read after a few seconds, at the same time, the TV screen will show all its folders. 2. You may play the files stored in the storage media much in the same way as you do the MP3 disc.
SPECIFICATIONS Power source: AC 100-240V~60/50Hz Rated power: 13W (main unit) 21W (main unit & slave screen) TV system supportable: PAL/NTSC/AUTO LCD display: 7"(~18cm) Operating Temperature Range: +5°C to +35°C Dimensions (main unit): 188(L) x 167(W) x 39(H) mm Operating Humidity Range: 10 % to 75 % Disc supportable: CD, CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW Support media format: DVD/MP3/MP4/XVID/KODAK PHOTO/JPEG Audio signal output: 1.
INSTALLATION OF THE PORTABLE DVD PLAYER IN A VEHICLE WARNING - On no account should this unit be used by the driver of a moving vehicle, or left unsecured in the vehicle whilst driving. - If this unit is being used by a passenger, ensure that it is secured or held safely, and that it does not obstruct any safety devices (eg. Airbags, Seatbelts etc). - Some vehicles have what is known as an 'Active Headrest'.