Operation Manual

ManualsBrandsLenco ManualsAudioMP CARD

User’s Manual

MP card

MP3 Player

Get to know the controls on Player

Item Description

(Previous / Fast-Backward, Volume level decrease)

(Play / Pause, On / Off)

3 VOL / S (Volume Control / Shuffle)

/ (Next / Fast-Forward, Volume level increase)

5 Earphone Output Jack (2.5mm) (Earphone / PC Connection / Charging / Built-in Reset

Function)

6 LED Indicator

A. About Player Battery

Player has an internal, non–user-replaceable battery. For best results, the first time you use the player,

let it charge for about 2 - 3 hours or until the status LED indicator light go Off, before you use it.

Note: Player continues to use battery power after it’s been turned off, if unit isn’t used for a while, the battery

might need to be charged.

B. Charging the Battery

You can charge the Player’s battery in two ways:

1. Connect player to your computer. Or,

2. Use the USB power charger. (available separately)

Note: For maintain the rechargeable battery performance, please disconnect the player with the computer or

Summary of content (4 pages)

PAGE 1
User’s Manual MP card MP3 Player Get to know the controls on Player Item Description / - (Previous / Fast-Backward, Volume level decrease) 1 2 (Play / Pause, On / Off) 3 VOL / S (Volume Control / Shuffle) 4 +/ 5 Earphone Output Jack (2.5mm) (Earphone / PC Connection / Charging / Built-in Reset (Next / Fast-Forward, Volume level increase) Function) 6 A. LED Indicator About Player Battery Player has an internal, non–user-replaceable battery.
PAGE 2
power charger when it is done. C. Connecting and Disconnecting Player You can connect the player to your computer to upload / download those music files, and charging the battery, disconnect them when you’re done. To Connecting Player: 1. Plug the 2.5mm jack plug of USB cable to the Player multi-function earphone jack, then plug the other side USB plug into a USB port on your computer, then the computer will detecting and installing driver automatically.
PAGE 3
E. Getting Start Player Turn Player ON / OFF and Playing Music: 1. Plug the stereo earphone plug into the earphone output jack. Press and hold button to turn ON the Player. The music will play and status LED indicator will light and flashing. 2. To turn OFF the Player, press and hold button. To Adjust Volume Levels 3. Press the “VOL / S” to enter volume control mode, the LED light will stop flashing for 6 – 8 seconds. Then, 4.
PAGE 4
G. Troubleshooting: Play cannot turn ON Check whether battery have enough energy. No sound is heard Check whether Volume is set to “minimum” and connect the headphone plugs firmly. Check whether the headphone plug is dirty. Corrupted MP3 may make a static noise and the sound may cut off. Make sure that the music files are not corrupted. Download of music files fails. Check whether music files format are support.