Operation Manual
- 4 -
POWER SOURCE
This system is designed to operate on
220V
AC
50Hz house current only.
Connecting this system to any other power
source may cause damage to the system and
such damage
is
not covered by your warranty.
NOTE:
The system has
an
AC plug and will only fit into matching AC outlets. This
is a safety
feature to reduce the possibility of
e
lectric
shock. If the plug will not fit in
your AC
outlets,
you should have
the
outlet changed by a qualified, licensed
electricia
n. Do not use an adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.
MAIN POWER SWITCH
IMPORTANT:
The
MAIN
power
SWITCH
is located on the
side
of the
main
unit.
This switch must be
ON
for the system to operate. The main
power switch should
be left in the
ON
position at all times. The only time you should set this switch
back to the
OFF
position is if you will not be using the system for an extended
period of time
for example, two weeks or longer. The remote controller cannot
operate the system if main power switch is in the
OFF
position.