PA-85 Portable Sound System with Bluetooth® USER’S MANUAL www.lenco.
Warning 1. 1.WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 2. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 3.
Thank you very much for buying this Mobile Battery Bluetooth Speaker! In order to make the speaker function best, please take time to read this instruction manual carefully before use. It will help you to know every function better. Please keep well this user’s manual for longtime reference. CAUTION To avoid failure and damage when using this device, please read this user’s manual and make sure that you fully understand the safety and operation instruction.
FEATURES 1. Portable Sound System with Bluetooth 2. Support different Power Supply modes: AC 230V/ External DC 12-15V/ DC 12V(battery) 3. Built-in rechargeable lead-acid battery for outdoor usage 4. With Equalizer for professional sound adjustment 5. With Wired MIC Input with Vol. and Echo controls 6. With Guitar Input and Guitar volume control 7. With auto detect USB & SD card reader function 8. With 3.5mm and AUX input 9.
Diagram 1: Diagram 2: COMPUTER Flat panel TV DVD/CD 5
BLUETOOTH Press the INPUT SWITCHING Button until the BLUETOOTH Indicator blinks. The BLUETOOTH function is ON. Turn on the BLUETOOTH in device and start searching for this BLUETOOTH speaker. You will find device name of LENCO PA-85. Select this to link to the speaker. The Indicator will stop blinking and light up in BLUE color when you are successfully linked. After the linking, you can start to play music from your device.
SPEAKER OPERATION INSTRUCTIONS Control Panel (Diagram 3) 1. Equalizers 2. USB/SD Indicator: When both USB and SD card are inserted, USB play first.. 3. AUX/Bluetooth indicator: blinks when searching external Bluetooth Device and keeps on when connected; Keeps on when playing by AUX.
4. SD card input: Insert SD card to play music. 5. USB input: Insert USB card to play music. 6. Repeat key, press this key to switch repeat one/repeat all/random: Repeat One: USB/SD indicator blinks about 2 times per second; Repeat All: USB/SD indicator blinks about 3 times per second; Random: USB/SD indicator blinks about 1 time per second. 7. Previous track/Long-press for fast backward 8. Pause and play 9. Next track/Long-press for fast forward 10.
Operation Reference Power AC Power Source Power Indicator CHG Indicator Power Management Unit Operation *OFF (if power cord is not NO Powered by battery connected) Powered by AC and CHARGING ONLY, F. Charge/OFF AC ON OFF Refer REMARK YES Will go into standby Not and charging cease Recommended after 15minutes no signal input Powered by AC and F. CHG Charge/OFF ON OFF Refer REMARK CHARGING ONLY NO Won't stop charging till complete F.
be caused by some external cross talks from your audio equipment, you can turn down the volume to solve it. Gear whines when using the microphones 1. The MIC Volume is too loud. 2. The microphones are close to the speaker 1. Turn down the MIC Volume 2. Keep the microphones at least 2 meters away from the speaker If the speaker still out of work after checking with the above troubleshooting, please ask qualified service centers to check and repair it.
SERVICE AND SUPPORT For information: www.lenco.com Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use.
