BENUTZERHANDBUCH PODO-151 Media-Player mit Schrittzähler Für weitere Information und Support gehen Sie bitte auf die Webseite http://www.lenco.
Warnhinweise Nicht erlaubte Schritte: · Gegenstände mit offenen Flammen, wie z. B. Kerzen, sollten niemals auf oder in die Nähe des Geräts gestellt werden. · Gegenstände die mit Flüssigkeiten gefüllt sind, wie z. B. Vasen sollten niemals auf oder in die Nähe des Geräts gestellt werden. · Benutzen Sie dieses Produkt nicht an Orten an denen es direkten Sonnenlicht, Hitze, starkem Staub oder Vibrationen ausgesetzt ist. · Benutzen Sie das Gerät niemals mit nassen Händen.
1. Bedienelemente des Players Nr.
Hinweis: Der Player verbraucht selbst dann, wenn er ausgeschaltet ist, weiterhin Batteriestrom. Wenn das Gerät für längere Zeit nicht verwendet wird, muss der Akku dem entsprechend aufgeladen werden. a. Aufladen des Akkus: Sie können den Akku des Players auf zwei verschiedene Weisen aufladen: Schließen Sie den Player an Ihren Computer an. oder, Verwenden Sie ein USB-Ladegerät. (Separat erhältlich) b.
a. Anschluss des Players Um den Player mit Ihren Computer zu verbinden, stecken Sie den Stecker des USB-Kabels in einen USB-Anschluss Ihres Computers und verbinden das andere Ende mit dem Player. Die Anschlussanzeige erscheint dann auf dem Bildschirm des Players. Der Player ist nun bereit zur Übertragung von Mediendateien von Ihrem Computer und die Batterie wird aufgeladen.
folgenden Menüs: Musik / Film / Aufnahme / Sprachaufnahme / Foto / eBook / Spiel / Einstellungen. Um den Player in den Bereitschaftsbetrieb zu versetzen, halten Sie die Center-Taste ( ) für 3 bis 4 Sekunden gedrückt. Um den Player wieder einzuschalten, halten Sie die Center-Taste ( ) erneut für 3 bis 4 Sekunden gedrückt. Menübildschirme (Musik) (Aufnahme) (Film) (Sprachaufnahme) (Fotos) (Einstellungen) (E-Book) (Spiele) (Schrittzähler) 4.
( ) betätigen. Sie können durch Gedrückhalten der M-Taste zum Hauptmenü zurückkehren. Einstellungsmenü (Menüseite 1) (Menüseite 2) a. Einstellen der "Systemzeit" (Datum & Uhrzeit): Wählen Sie "System Time" mithilfe der Tasten / ( / ) und betätigen Sie dann die M-Taste zur Anzeige der Einstellungsseite für Datum und Uhrzeit. Benutzen Sie die V-Taste (VOL) zur Auswahl des Jahrs und stellen Sie das Jahr mithilfe der / ( / ) ein.
Die Einstellung der automatischen Abschaltung wirkt sich auf die Betriebsdauer aus, bevor der Akku erneut aufgeladen werden muss, indem der Player automatisch ausgeschaltet wird, wenn keine Taste betätigt wird. Als weitere Option steht außerdem eine Einschlaffunktion zur Verfügung. Zum Einstellen der Abschaltfunktion wählen Sie "Power off" und dann "Off time".
Benutzen Sie diese Funktion, wenn Sie Details zur Firmware-Version benötigen. Wählen Sie mithilfe der M-Tasten und den Tasten / ( / ) "Firmware Version" und ein Informationsbildschirm erscheint. Zur Rückkehr zum Einstellungsmenü oder Hauptmenü, betätigen Sie die Center-Taste ( ). oder halten Sie die M-Taste gedrückt. i. Firmware-Upgrade (nur mit System-Tools) Um die Leistung des Players zu erhöhen, um Probleme mit der Firmware oder Beschädigungen der Software z. B.
Halten Sie die Taste Halten Sie die Taste ( ( ) gedrückt, um den Schnellvorlauf zu aktivieren. ) gedrückt, um den Schnellrücklauf zu aktivieren. d. Einstellen der Lautstärke Betätigen Sie während der Musikwiedergabe die V-Taste (VOL). Es erscheint dann ein Lautstärkeregler. Benutzen Sie die Tasten / ( / ), um die Lautstärke anzupassen. Warten Sie 6 bis 8 Sekunden oder betätigen Sie die Center-Taste ( Musikwiedergabebildschirm zurückzukehren.
Wählen Sie dann mithilfe der Tasten / ( / ) die Musikdatei, die Sie löschen wollen und bestätigen Sie Ihre Auswahl mit der M-Taste. Sobald eine Datei ausgewählt ist, betätigen Sie die M-Taste und wählen Sie Yes zum Bestätigen oder No zum Abbrechen. c. Alle Dateien löschen Wählen Sie im Musikuntermenü die Option "Delete all" und wählen Sie dann mithilfe der Tasten / ( / ) "Yes" oder "No". Sobald "YES" oder "NO" erscheint können Sie Ihre Auswahl mit der M-Taste bestätigen.
Beachten Sie, dass die Anzahl der Wiederholungen und der Intervall zwischen den Wiederholungen abhängig von den Einstellungen des Players sind (siehe unten). Zur Auswahl eines anderen Wiederholungsabschnitts benutzen Sie erneut die Taste ( ). Der neue Abschnitt wird daraufhin wiederholt. Zum Abbrechen der Abschnittswiederholung betätigen Sie die M-Taste. Oder betätigen Sie die Center-Taste ( ) zum Unterbrechen der Wiedergabe.
d. Einstellen der Lautstärke Betätigen Sie während der Wiedergabe Sie V-Taste (VOL) und benutzen Sie dann die Tasten / ( / ) zum Verringern oder Erhöhen der Lautstärke. Um den Lautstärkepegel im gestoppten Zustand einzustellen, betätigen Sie die V-Taste (VOL) und der Lautstärkenbildschirm erscheint. Benutzen Sie dann die Tasten / ( / ) zum Einstellen der gewünschten Lautstärke.
d. Wiederholung Wählen Sie im Filmuntermenü die Option "Repeat" und wählen Sie mithilfe der Tasten / ( / ) und der M-Taste den gewünschten Wiederholungsmodus (Normal / Einzelwiederholung / Verzeichniswiedergabe / Verzeichniswiederholung / Alle wiederholen / Zufallswiedergabe / Intro-Wiedergabe). e. Verlassen Wählen Sie "Exit", um zum Wiedergabebildschirm zurückzukehren. c.
Markieren Sie die unverarbeiteten AMV-Dateien im Dateifenster. Das hervorgehoben als . Klicken Sie dann auf das Symbol -Symbol erscheint und ein Dialogfeld wird angezeigt. Wählen Sie das Bildformat "128 x 128" und die Bildrate "middle" für Ihre AMV-Datei. Bestätigen Sie, indem Sie auf OK klicken. Klicken Sie auf , um die Konvertierung zu starten. Nach der Konvertierung werden die AMV-Dateien automatisch abgespielt.
integrierten Mikrofon benutzen. 1. Aufnahme einer Sprachnotiz Wählen Sie im Hauptmenü mithilfe der Tasten / Option "Record" und der Aufnahmebildschirm erscheint. ( / ) und der M-Taste die Aufnahmebildschirm 3. 2. Aufnahmestart/-pause Betätigen Sie die Center-Taste ( ) zum Starten der Aufnahme. Betätigen Sie die Taste Center-Taste ( ), um die Aufnahme zu unterbrechen und die Aufnahmezeit wird anhalten und blinkt. Betätigen Sie die Taste erneut, um mit der Aufnahme fortzufahren.
12. Benutzung des Schrittzählers Gehen Sie im Hauptmenü auf "Pedometer" mithilfe der Tasten der M-Taste. Das Schrittzählermenü erscheint. / ( / ) und Schrittzählermenü a. Vorbereitung des Schrittzählers Bevor Sie die Schrittzählerfunktion verwenden können, müssen Sie Ihre persönlichen Daten eingeben und Schrittzählersensor kalibrieren, um ihn individuell einzurichten. Gehen Sie im Hauptmenü auf "Pedometer" > "Setting" mithilfe der Tasten / ( / ) und der M-Taste. Ein Untermenü erscheint.
Berechnen Sie dann Ihre Schrittlänge, indem die gesamte Distanz durch 10 teilen. Beispiel: Gesamtstrecke = 800 cm 800 cm ÷ 10 Schritte = 80 cm c. Starten / Beenden der Schrittzählerfunktion & Rekorde einsehen Wählen Sie "Start", um die Schrittzählerzählerfunktion zu starten. Wenn die Einstellungen abgeschlossen sind, fängter der Schrittzähler an zählen, bis "00:00:00" erreict ist. Zur gleichen Zeit fängt der Schrittzählersensor an Ihre Schritte zu zählen. Sie können dann mit dem Laufen beginnen.
angezeigt. Wählen Sie einen Ordner und eine Datei, die Sie zuerst abspielen möchten. Wenn der Schrittzähler aktiviert ist, wird die Datei im Anzeigemodus wiedergegeben. Die Bildschirmanzeige kehrt dann zum Schrittzählermenü zurück. Danach ... Wählen Sie "Start", um den Schrittzähler im Anzeigemodus zu aktivieren und betätigen Sie dann die die Center-Taste ( ) zum Starten der Musikwiedergabe mit dem Schrittzähler zur gleichen Zeit (falls erwünscht).
Benutzung des Geräts in der Hosentasche Legen Sie das Gerät nicht in die hinteren Hosentaschen, um zu verhindern, dass Sie sich darauf setzen. Schließen Sie den Reißverschluss / Knopf der Tasche (falls vorhanden), um zu verhindern, dass das Gerät herunterfällt. Benutzung des Geräts in der Tasche Legen Sie das Gerät in einen sicheren Bereich oder Fach Ihrer Tasche. Achten Sie darauf, dass das Gerät horizontal oder vertikal in einem Fach in der Tasche liegt.
Auf- und Abbewegung. Beim Aufstehen oder Hinsetzen. Bei anderen Sportarten außer Laufsportarten. Aufsteigende oder absteigende Bewegungen bei Treppen oder steilen Hängen. Der Benutzer läuft mit ungleichmäßigen Schritt en. Wenn Sie Sandalen tragen oder ein abnormales Laufverhalten haben. Zwischendurch Starten und Stoppen oder andere Formen von Laufunregelmäßigkeiten aufweisen. Besonders langsam gehen. Vibrations von fahrenden Fahrzeugen. Wie z. B. beim Fahrrad fahren, im Auto, Zug oder Bus.
b. Dateiauswahl Betätigen Sie die Taste Betätigen Sie die Taste c. Schnellsuchlauf Halten Sie die Taste Halten Sie die Taste ( ( ( ), um zur nächsten Datei zu springen. ), um zur vorigen Datei zu springen. ) gedrückt, um den Schnellvorlauf zu aktivieren. ( ) gedrückt, um den Schnellrücklauf zu aktivieren. d. Einstellen der Lautstärke Betätigen Sie während der Musikwiedergabe die V-Taste (VOL). Es erscheint dann ein Lautstärkeregler.
Bildschirm erscheint während des Vorgangs die Meldung "Deleting". Wenn der Löschvorgang abgeschlossen ist, erscheint die Meldung "Empty disk!" für ein paar Sekunden. d. Verlassen Wählen Sie "Exit", um zum Wiedergabebildschirm zurückzukehren. 15. Benutzung des Sprachaufnahmeuntermenüs während der Wiedergabe Während der Wiedergabe wollen Sie u. U. Veränderungen vornehmen, wie z. B. Einstellungen zur Wiederholung, Equalizer usw. Zum Ändern der Einstellungen gehen Sie bitte wie folgt vor: a.
Intervalldauer (1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 Sekunde(n)) mithilfe der Tasten / ( / ) und der M-Taste ein. Die Wiedergabe stoppt dann zwischen der Wiederholung des von Ihnen gewählten Abschnitts für die von Ihnen eingestellt Dauer. c. Verlassen Wählen Sie "Exit", um zum Wiedergabebildschirm zurückzukehren. Hinweis: Halten Sie die M-Taste gedrückt, um zurück zum Hauptmenü zu kehren. 16.
c. Dateien löschen Wählen Sie im Fotountermenü die Option "Delete file" und ein Listenmenü erscheint. Wählen Sie dann die Bilddatei, die Sie löschen wollen, mithilfe der Tasten / ( / ). Sobald eine Datei ausgewählt ist, betätigen Sie die M-Taste und wählen Sie Yes zum Bestätigen oder No zum Abbrechen. d. Alle Dateien löschen Wählen Sie im Fotountermenü die Option "Delete all" und wählen Sie dann mithilfe der Tasten / ( / ) "Yes" oder "No".
Sobald Sie eine Datei ausgewählt haben, betätigen Sie die M-Taste und dann die Center-Taste ( ), um den Text zu lesen. b. Wiedergabemodus Gehen Sie im eBook-Untermenü auf "Playback set" und wählen Sie dann "Manual play". Benutzen Sie die Tasten / ( / ), um zur nächsten / vorigen Seite zu wechseln, wenn Sie den manuellen Seitenwechsel gewählt haben.oder Wählen Sie die Funktion "Auto Play".
erscheint. Benutzen Sie dann die Tasten das Sie löschen wollen. / ( / ) zur Auswahl des Lesezeichens, Sobald Sie eine Datei ausgewählt haben, betätigen Sie die M-Taste zur Bestätigung. Das betreffende Lesezeichen wird damit gelöscht und die Anzeige geht zurück zum aktuellen Text. c. Lesezeichen hinzufügen Gehen Sie während der Textanzeige auf die gewünschte Seite, auf der Sie ein Lesezeichen setzen wollen und betätigen Sie die M-Taste, um das E-Book-Untermenü aufzurufen.
Halten Sie die M-Taste gedrückt, um das Spiel zu beenden.
23. Fehlerbehebung Das Gerät kann nicht eingeschaltet werden Kein Ton wird über die Kopfhörer wiedergegeben Die Zeichenfehler in der Anzeige Kopieren von Musikdateien auf dem Player schlägt fehl 24. Technische Daten Abmessungen Gewicht LCD-Anzeige Computeranschluss Kopfhörerimpedanz Interner Speicher Akku Audio Musikformate Videoformat Aufnahmeformat Bildformate E-Book-Format Schrittzähler Betriebstemperatur Betriebssystem * Überprüfen Sie, ob der Ein/Aus-Schalter in der ON-Position ist.
vorkommen, dass einige der Anweisungen, Spezifikationen und Bilder in dieser Dokumentation in Ihrem speziellen Fall von der Wirklichkeit abweichen. Alle Abschnitte dieser Bedienungsanleitung dienen lediglich zur Veranschaulichung und können unter Umständen in Ihrem Fall nicht angewandt werden. Rechtsansprüche können nicht aufgrund der Beschreibungen und Anweisungen in dieser Anleitung geltend gemacht werden.