TAB-1013 25 CM (10,1") INTERNET TABLET WITH ANDROID™ 4.0 User manual For information and support, www.lenco.eu UM_TAB-1013_GB_V1.
Table of content What’s in the box? ...................................................................................................... 3 IMPORTANT SAFETY INSTRUCTIONS .................................................................... 4 Exploring the device ................................................................................................... 7 Getting Started ...........................................................................................................
Dear customer, Thank you for purchasing this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this product, we manufactured this product using high quality standards, materials, components and care. Note: This user manual is printed prior to the product development. When a part of the product specification must be changed to improve operability or other functions, priority is given to the product specification itself.
IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY BEFORE USE. This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this unit. This symbol indicates that dangerous voltage is present within this unit constituting a risk of electric shock or personal injury. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE.
This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use. Although this unit has been carefully manufactured and rigorously checked before leaving the factory, as with all electrical appliances, it is possible for problems to develop.
Declaration of Conformity Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. IMPORTANT NOTES: The USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data. WARNING: long term exposure to loud sounds may lead to temporary or permanent hearing impairment.
Exploring the device 1. VOL-/VOL+ Press VOL- to decrease the volume level. Press VOL+ to increase the volume level. 2. Power Press to turn the unit on, or to turn the screen on or off. Press and hold to access the Power Off menu. 3. Camera Use it to take pictures or capture videos. 4. Headphone Audio output connection for headphones. 5. HDMI Connect to a TV or other displays. 6. MIC Use internal MIC to record voice. 7. Adapter In Charge and power the tablet with the adapter. 8.
Getting Started Turning the Tablet on and off To turn the tablet on: Press and hold the Power key until the LCD screen turns on. Wait until the Home screen appears; the tablet is now ready for use. To turn the tablet off: Press and hold the Power key until the Device Options menu appears. Touch ok the screen to turn off the tablet. Turning the Screen On and Off (Standby) When the tablet is on, you can turn off the screen to conserve battery power. Simply press the Power key once to turn the screen off.
Unlocking the Screen When the screen turns off, you will have to unlock the screen when you turn it back on. To unlock the screen, drag the lock icon across the screen towards the lock icon. About Applications To open an application, touch the application icon on the home screen or in the Launcher where you can tap the icon right up on the home screen to get in. Launcher screen: The screen shown above is for illustrative purposes only.
Installing Applications You can also download an install additional applications from the device's applications marketplace, the web browser, or other sources. The tablet must be set to allow installation of applications from non-Market sources. The Unknown sources option can be set in the Application settings menu. Connect to a Wi-Fi network The Notification bar displays icons that indicate your tablet’s Wi-Fi status. Notification that an open Wi-Fi network is in range.
When you have successfully connected to a Wi-Fi network, the Notifications bar at the low of the screen will show a Wi-Fi signal indicator. To learn about how to add a Wi-Fi network when it is not in range or when the router is set to obscure the network name (SSID); or to configure advanced Wi-Fi options, please refer to the user manual. Connecting to a Computer Connect the tablet to a computer to transfer files. 1.Connect your tablet to the computer.
3. Mount the storage. Touch button Turn on USB storage to mount the tablet's built-in storage. When it is mounted, you can copy files to or from your tablet. If you need help setting the display mode of the TV, please refer to the documentation provided by the TV manufacturer. If there is no sound from the tablet on your TV, you may need to set the HDMI switch sound settings. Service and support Lenco has written this user manual with the utmost care.
Specifications Processor RAM Storage Display Wi-Fi Networking Video Output Audio Output PC Interface BOXCHIP A10 1GHz(Cortex A8) 1GB DDR3 4~16GB(option) flash built-in; microSD card slot (max.32GB supported) 10.1”TFT LCD(1024x600), Capactive touch screen IEEE 802.11 b/g/n Mini HDMI,type C (1080p and 720p supported) 3.5mm headphone Additional Features USB 2.0 high speed Built-in microphone Front facing camera(0.3MP) 1x1W speaker Operating System Android™ 4.
