PORTABLE DIGITAL TV(DVB-T) TFT-725 User Manual For information and support, www.lenco.
Important Safety Instructions 2 Remote Control 3 Front and Rear panel illustration 5 User interface 6 Quick Installation 6 Menu Operations 7 Normal Play 12 Screen Setting 14 Support 14 Specifications 14 1
Introduction Important Safety Instructions Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel. Ÿ Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture. Ÿ Do not expose the Adaptor and product to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the unit.
Remote Control Remote Key Function: 10 1) SOURCE:To select input source. 11 2) INFO: Used to display information about the 3 1 2 12 channel being viewed, or special function indicated on the menu. 13 5 6 4 3) NUMBER KEYS: Used to select channel numbers or input numbers in menus. 14 7 8 9 4) AUDIO: Used to exchange the audio language or 15 the audio track. 0 5) TEXT: Used to open teletext OSD display if 16 OK teletext available in the broadcasted stream.
Using the Remote Control Point the remote control at the remote sensor in order for the player to function correctly. The remote will function to approximately 21' from the remote sensor at an angle of approximately 30O each direction. Note: Directing the remote sensor toward any light source, such as direct sunlight, may cause the unit to malfunction. Do not spill water or put wet items on the remote control. Never disassemble remote control.
Panel illustration 1. Front View 14 16 15 17 16 13 1 2 3 4 5 6 7 8 9 10 12 11 1) SOURCE: To select input source. 2) SETUP:Used to adjust the brightness/contrast/color/hue parameter of TFT screen when there is no menu on the screen. 3) CH+: Move around the menu screens or selecting the channels in non-menu state. 4) OK: Confirm a selection within a menu. 5) VOL-: Move around the menu screens or changing the volume in non-menu state.
User Interface 1.Quick Installation 1.1 Setting Country and Language User can select preferred country and language at Setup - Installation page. (1) Press
2.Menu Operations Once the channel scan is finished and all the channels are stored into the database, you can start to watch the digital terrestrial TV channel or listen to the radio broadcast, some typical operations are given in this chapter. 2.1 Main Menu Main Menu for operating a lot of functions. (1) Press
button to enter Main Menu. See Figure 1. (2) Press button to display the version information of STB. 2.2 SETUP Set the system settings of STB. See Figure 1. 2.2.2.2.2 TV Setup Setup the display mode for TV. See Figure 5. 2.2.2.1 TV Mode Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content. This setting should be matched with user's TV. 2.2.2.2 OSD Transparency Set the On Screen Display transparency. 1 is the most transparent. 2.2.2.3 Banner Display Time Set Banner displays time. Banner doesn't disappear when set as timeout when set as other values. Always and disappears at 2.2.
2.3 TV/RADIO There are two types of program: TV and Radio. The operation of the List and Guide of TV and Radio are almost the same. Herein take TV as example. 2.3.1 List User can operate some functions in List. See Figure 7. Figure 7. TV List 2.3.1.1 Favorites User can quickly channel up/down the favorite programs by favorite filter. There are 8 groups of favorite for user setting: News, Sport, Movie, Music, Shopping, Travel, Boy and Girl.
2.3.1.9 Search User can search the program name by partial keyword. (1) Press button to select Search option. (2) Press button to entry search page. (3) Press button to input keyword. (4) Press button to Search and return List. The matched program will be focused. (5) Press button to the next or previous matched program. 2.3.2 Guide Guide is also naming EPG (Electronic Program Guide). See Figure 8.
2.4.1.1 Thumbnail/Folder The info (Width X Height and Date) of selected photo will be displayed at the left bottom in Thumbnail mode and right up in Folder mode. See Figure 9. Press button to browse folders or files. Press button to view the selected photo and press again to start slide show. Press button to select device between USB and Card Reader,or external USB hub. Figure 9. My Album - Thumbnail 2.4.1.
3.Normal Play Normal Play means STB under watching TV or listening to the Radio. See Figure 11. Figure 11. Normal Play - Radio Figure 12. Program Info 3.1 Information Press button once to display info banner. Banner displays the program No., favorite setting, current time, program name, now and next event, lock, scramble, subtitle and teletext info. Press button when banner exist to display detail info of now event. Press button when detail exist to display current program info.
3.5 Audio Switch the sound channel and switch sound mode to LR(stereo) or LL(left) or RR(right). If setting audio language at SETUP->Installation->Audio Language, the audio channel default language will be chosen by setting. See Figure 14. Press
SCREEN SETTING PICTURE Press the FUNCTION button to display PICTURE setting as bellow: Press button to select different option. Press button to adjust different values of the selected option. Press button to exit the menu. Note: HUE option is only adjustable when input NTSC signal in DTV/AV mode. S-color option will be available only in AV in mode.