LENCO TFT LCD DIGITAL AND ANALOG TV TFT-1020-User Manual For information and support, www.lenco.
Warning Important Notes on Safety Before you use this product, please read carefully the corresponding parts about the signs on the product you have bought and keep it properly for future reference. Warning This sign indicates that there is Electric shock, do not open dangerous high voltage inside, and it is Note: In order to reduce electric shock, please do not take off the cover. dangerous to contact any component inside the product in any form. There is no component inside that users can maintain.
Do not insert any metal object into the holes of this television. Otherwise it may lead to the danger of electric shock or the damage of the television. In order to avoid electric shock, do not contact the inside of this television. Only qualified technical personnel can open of the cover of this television. Please make sure to insert the power adapter firmly into the socket.
CONTENT GENERAL INFORMATION ABOUT THE TFT-1020 ..........................................................................................1 QUICK GUIDE ..........................................................................................................................................................2 PLUG IN YOUR TFT-1020 .......................................................................................................................................2 PREPARING THE REMOTE CONTROL..................
GENERAL INFORMATION ABOUT THE TFT-1020 TFT-1020 is a portable digital TV set; it can be used in a car or outdoor. Throughout this manual you will notice that everyday operation of your TFT-1020 is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your TFT-1020, guiding you through installation, channel selection, viewing and many other functions. NOTICE Using the buttons on the remote control can perform all functions.
QUICK GUIDE Plug in your TFT-1020 You can use either an AC adapter or a rechargeable Li-ion battery as a power source for your TFT-1020. NOTICE : To ensure safety, please do not arbitrarily replace the power adapter, the TFT-1020 only with the supplied AC adapter. To use the AC adapter: 1. Plug one end of the power cord into the AC outlet. 2. Plug the cable attached to the AC adapter into the DC in port on the TFT-1020.
1. PANELS 1.1 Front panel and side panels 1.Screen 2. SD/MMC/MS CARD jack 3. USB jack 4. Power switch 5. Power supply jack 6. VGA input jack 7. Video input jack (CVBS) 8. Audio input jack (white port is left) 9. Audio input jack (red port is right) 10. Speaker 11. Portable receiving antenna (the antenna jack can plug the accessorial antenna) 12.
15. Front panel touch keys (include CH+, CH-, VOL+, VOL-, OK, , and MODE) 1.2 Front panel touch keys definition CH+: Move up in the menus and change to the next channel in viewing mode. CH-: Move down in the menus and change to the previous channel in viewing mode. VOL+ Move left /change settings in menus. Decrease the volume level in viewing mode. VOL-: Move right /change settings in menus. Increase the volume level in viewing mode.
2. INTRODUCTION 2.1 Check list The box for your TFT-1020 should contain the following items: The TFT-1020 machine Owner’s manual Remote control Power supply adapter (AC adapter) Accessorial Antenna Headphone Car Power Adapter 2.2 About transmission Buildings, mountains and the surrounding terrain can block Radio and TV signals. Depending on whether the receiver is located in a valley, behind a mountain or in a concrete building, the quality of reception may vary considerably.
If possible, place the antenna by the window and directed towards the TV transmitter. If possible, please use the power antennas. The strength of TV signal varies according to reflections from buildings or mountains. The signal penetrates thick stone or concrete walls poorly. However, a wooden building is not a big barrier to digital TV signals. 2.4 Connecting the TFT-1020 to the TV Connect the TFT-1020 AV input socket for video and audio.
2. 6 Installing Stand Insert the front end of the support to the slot on the back cover, and then rotate the base as illustrated in bottom, until the support is locked properly. In order to storage remote control more expedient, insert the remote control to the slot on the back stand.
3. REMOTE CONTROL 3.1 Definition This section describes how to operate the TFT-1020 using the buttons on the remote control. FAV To operate the favorite channels (DVB and ATV Function mode) Mute Press once to turn the sound off/on (mute/ unmute). 16:9/4:3 Screen switch. (DTV ATV and AV Function mode) Mode AUTO Ok Menu /Exit Press this button open the mode menu and press again to shift between Digital TV Analogue TV AV ,VGA and Multimedia.
Cursor up button, move up in the menus and change to the next channel in viewing mode. Cursor down button, move down in the menus and change to the previous channel in viewing mode. PIC Press to open the picture mode menu. Cursor left button, move left /change settings in menus. Decrease the volume level in viewing mode. Cursor right button, move right /change settings in menus. Increase the volume level in viewing mode. 0~9 Press to change the channel and to select individual menu options.
4. NAVIGATING WITH MENUS 4.1 Basic operation methods of TV set 1. Connect with power supply and turn on the power switch. In normal status, the power light is red. If you only use the battery power supply, the light is blue. 2. Pull out telescopic antenna. 3. Press up/down cursor buttons to choose the desired channel. 4. Press left/right cursor buttons adjust the sound volume of the TV ! Attention: The following describes the functions of your TFT-1020 while watching Analog TV and terrestrial digital TV.
: You can select how the picture mode shall be sorted. There are four sort mode (personal, standard, dynamic and soft.) are used here. Figure 4.2.1 Brightness Left/right cursor buttons adjust the brightness of the screen. Contrast: adjust the contrast of the screen. Color: adjust the color of the screen. Sharpness: adjust the sharpness of the screen. : You can select how the audio mode shall be sorted. There are five sort mode (personal, standard, music, movie and sports.) are used here.
Figure 4.2.2 Bass Left/right cursor buttons adjust the bass of the screen. Treble: adjust the treble of the screen. Balance: adjust the balance of the screen. Audio channel: Left/right cursor buttons adjust the audio channel: Stereo, L and R Prefer Language: Left/right cursor buttons adjust the prefer language: English, German, Danish and so on. ! Audio Channel and Prefer Language menus only DTV mode and the program signal must contain.
Figure 4.2.3 Menu Language: Left/right cursor buttons adjust the screen: English, Dutch, French, German, Italian, Portuguese, Spanish . Zoom Mode: Left/right cursor buttons adjust the screen: 16:9, 4:3 Battery Information: right cursor buttons enter the battery information. ! IF the Machine charge battery, the Battery Information menu can′t select.
Figure 4.2.4 ! Clock setting menu only DTV mode, : (Only DTV mode) To open this menu you will be asked to enter your access code. From the factory the access code is set to 0000. After set, the access code has to be entered before you can watch locked channels and change the password. Figure 4.2.
:( Under the DTV mode) Under the search menu, when you want to search for channels, a channel search procedure can be performed in different ways at Automatic Search and Manual Search. And you can edit favorite or skip channel lists in this menu. If you edit channel favorite list ON, Press the FAV button can display the favorite List. Figure 4.2.6 Under the Program Search menu, Use right cursor button enter the submenu: Figure 4.2.7 The TV list may contain a lot of channels.
:( Under the ATV mode) Figure 4.2.8 Program Search menu under the ATV mode only add color system and sound system submenu. Color System: Left/right cursor buttons adjust the screen: AUTO, PAL, SECAM Sound System: Left/right cursor buttons adjust the screen: BG, DK, I, L ! If the Program List menu does not exist . The system will automatically start the first time installation. Figure 4.2.
Press OK button to select YES; Figure 4.2.10 Press OK button to select Country at the standard of local TV system .and Press CH+/CHbuttons to select other items. Set Language menu and Time Zone too. ! The region item is decided by the signal of different country’s broadcasting companies. 4.2.3 Special Features at the DTV mode Electronic Program Guide (EPG) Pressing EPG key will open the EPG page. In the EPG you will find information about the programs for the current day and for the following seven days.
4.3 Audio and video input First just inset the plug of the external video cord into yellow jack, and left audio plug into the white port and right audio plug into the red port. Press the MODE key to the AV mode, the screen display video play and music. Figure 4.3.1 ! Attention: in the AV and VGA mode the operate menu have a little difference with DTV and ATV mode. compare 4.
4.5 Multimedia ! Attention: Make sure the memory card into the right slot. If the card is improperly inserted, it may not function properly. Press Mode key at the remote control or front panel, and Press CH+/CH- buttons to select multimedia, press OK button enter. You can enter the icon by pressing OK key and pressing MENU key to go back to the topper Menu interface. Figure 4.5.1 When you select memory equipment display reading fulfil, you can enter the icon by pressing OK key.
In the music play interface, choose the file and press OK key playing. And press VOL+ key to music control submenu. Press menu key to return main interface. Figure 4.5.3 Photo:At the function select interface, use the VOL+/VOL- to move the cursor to icon and press OK key enter. Press CH+/CH- buttons to move the cursor to picture and press OK key enter, during the picture view mode, press VOL+ key to photo control submenu. And then play the pictures which in current directory automatically. Figure 4.5.
Figure 4.5.5 5. MAINTENANCE 5.1 Handling your TFT-1020 1. Do not drop the machine or heavy objects on top of the TFT-1020 2. Do not place the machine in a location subject to: Heat sources, such as radiators or air ducts, 3. Direct sunlight, Excessive dust, Moisture or rain, Mechanical vibration or shock, Strong magnets or speakers that are not magnetically shielded, Ambient temperature of more than 35 oC or less than 5 oC and High humidity. 4. Do not place electronic equipment near the machine.
5.2 Considerations about the screen 1. Please read the details of this guidebook before using, and store safely in case use another day. 2. You may see tiny black points and/or bright points (red, blue, or green) that continuously appear on the LCD. LCD has a very few (0.01%) unlit pixels and always lit pixels. You may also see distortion in colours or brightness depending on your perspective. This is a normal result of the manufacturing process and does not indicate a malfunction. 3.
2. Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder. 3. You can purchase a power strip with a surge protector. This device prevents damage to the machine caused by sudden power surges, in an electrical storm. 4. Do not place heavy objects on the power cord. 5. To disconnect the cord, pull it out by the plug. 6. Unplug the machine from the AC outlet if you are planning to not use the machine for a long time. 7. Make sure that AC outlet is easily accessible.
6. TROUBLESHOOTING Problem Possible causes What to do Check that the mains cable is plugged into the power socket Mains cable is not conn- Make sure the battery is ected. installed properly and charged. The LED does The battery isn’t installed not light up/is not lit. or need to recharge. Reattach the AC adapter and reinstall the battery, Condensed fluid may cause and press the power button to turn on the machine. the machine to malfunction.
During the channel searching process, the buttons or remote controller’s keys are insensitive. Can’t play the music file correctly Can’t play the video. If things does not work out There are no terrestrial as they should, let the local TV dealer check whether digital transmissions in the the aerial is intended for area. receiving digital transmissions or not. If not you have to exchange the aerial.
Photo Playback RF input Frequency VHF Low VHF High UHF 48.25MHz 168.25MHz 464.25MHz 160.25MHz 456.25MHz 863.25MHz Format JEPG(EXIF,JFIF baseline sequential DCT) Max. resolution 1,2 Mega-pixel Video Video Playback Coding Format AVI (DIVX4.0,DIVX5.0,XviD,MPEG4 ASP (Level 5)) Max. resolution 800 X 480 Bit rate Audio Playback AV input Insert Battery External power supply AUDIO (MP2,AC3,PCM) ≤4Mbps(In Cards) File Format (Sample Rate 44.1kHz Bit Rate32k-320kbps) CVBS input level range 1.