EN
What’s in the Box Main Unit Instruction Manual 3.5mm to 3.5mm Cable (For TV Headphone Output) AC Power Cable Design and specifications are subject to change without notice.
Important Safety Instructions Safety 14 The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. 1 2 3 4 5 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Identifying the Parts Main Unit: Top View Rear View 4 LINE IN Terminal Connect to an external audio device. 5 AC~ Connect to a power source. 1 /SOURCE Select LINE IN 1 or LINE IN 2. 2 AUTO POWER Light Indicate mode of auto power. Red light: Standby mode. Green light: play through LINE IN 1. Yellow light: play through LINE IN 2. 3 + VOLUME Increase or decrease the volume level.
Connections Connect to TV Connect Power Caution: - Risk of product damage! - Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. This unit is very user friendly, please just connect it directly to TV’s headphone jack as below : 1 Connect the LINE IN cable to: - LINE IN socket on the unit. - HEADPHONE socket on TV. 2 Unit turn on automatically. Press the /SOURCE button to select source. 3 Turn on your TV.
Troubleshooting Specifications To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. General Power Requirements.. AC 230V ~ 50Hz Power Consumption..................... 6.5W Output Power...............7.5W x 2 + 15W Total Harmonic Distortion...................... ..........................................1%(1kHz, 1W) Audio Input Sensitivity/Impedance LINE: .................................