BENUTZERHANDBUCH Xemio-656 Media-Player Weitere Informationen und Hilfe bei www.lenco.
Warnhinweise BENUTZEN SIE ZUR BEDIENUNG DES GERÄTS STETS DEN SCHREIBSTIFT So nicht! • Stellen Sie keine offenen Flammen (wie brennende Kerzen) auf oder in unmittelbarer Nähe des Geräts ab. • Stellen Sie keine mit Wasser gefüllten Gegenstände (wie Vasen) auf oder in unmittelbarer Nähe des Geräts ab. • Setzen Sie das Gerät keiner direkten Sonneneinstrahlung, Hitze, Staub oder Vibration aus. • Benutzen Sie das Gerät nicht mit nassen Händen.
1.
a) Aufladen des Akkus: Sie können den Akku des Players auf verschiedene Weisen aufladen: Schließen Sie den Player an Ihren Computer an. Oder, Verwenden Sie ein USB-Ladegerät. (Separat erhältlich) b) Anschluss und Aufladen: Sobald Sie den Player mit Ihrem Computer/Ladegerät verbunden haben, erscheint "Connect" auf dem Bildschirm. Während der Ladevorgangs bewegt sich die Batteriestandsanzeige auf dem Bildschirm. Der Akku wird dabei aufgeladen.
Der Player ist nun bereit zur Übertragung von Mediendateien von Ihrem Computer und die Batterie wird aufgeladen. Sie können Dateien von Ihrem Computer übertragen, indem Sie sie einfach mithilfe der Maus herüberziehen oder indem Sie die Funktionen Kopieren und Einfügen benutzen. Trennen Sie den Player ab, wenn Sie fertig sind. b) Abtrennen des Players: Es ist wichtig den Player während der Synchronisierung bzw. Übertragung von Dateien nicht vom Computer abzutrennen.
(Foto) (eBook) (Spiel) (Einstellungen) 4. Einstellungsmenü Möglicherweise wollen Sie Datum und Uhrzeit einstellen oder bestimmte Standardeinstellungen ändern, bevor Sie den Player verwenden. Um das Einstellungsmenü im Hauptmenü aufzurufen, wählen Sie "Setup" mithilfe der Tasten / und betätigen Sie die M-Taste. Daraufhin erscheint das Einstellungsmenü. Sie können im Menü zurück zur vorherigen Seite gelangen, indem Sie die Taste betätigen.
Zum Ändern der LCD-Hintergrundbeleuchtung wählen Sie "LCD set" > "Dark mode" und es erscheint ein Einstellungsbalken. Wählen Sie eine der folgenden Einstellungen mithilfe der M-Taste und den Tasten / : 0 (immer an) / 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 Sekunden. Wählen Sie "0", wenn die LCD-Hintergrundbeleuchtung immer eingeschaltet bleiben soll. (Mit dieser Option wird die Akku-Leistung verringert!) c) Ändern der Anzeigesprache Dieser Player unterstützt unterschiedliche Anzeigesprachen.
Wiedergabebildschirm a) Musikwiedergabe Betätigen Sie die Taste im Wiedergabebildschirm, um die Wiedergabe zu starten. Betätigen Sie die Taste , um die Wiedergabe der Musik vorübergehend anzuhalten. Betätigen Sie die Taste erneut, um mit der Wiedergabe fortzufahren. b) Titelauswahl Betätigen Sie die Taste Betätigen Sie die Taste c) Schnellsuchlauf Halten Sie die Taste Halten Sie die Taste , um zum nächsten Musiktitel zu springen. , um zum vorigen Musiktitel zu springen.
Im Musikuntermenü wählen Sie die Optione "Local folder" zur Anzeige eines Listenmenüs. Wählen Sie einen Ordner oder eine Musikdatei mithilfe der Tasten / und der M-Taste. Sobald eine Musikdatei ausgewählt ist, geht das Gerät zurück zum Wiedergabebildschirm. Betätigen Sie dann die Taste zum Starten der Wiedergabe. b) Dateien löschen Im Musikuntermenü können Sie die Option "Delete file" wählen und ein Listenmenü erscheint.
b) Videoauswahl Betätigen Sie die Taste Betätigen Sie die Taste c) Schnellsuchlauf Halten Sie die Taste Halten Sie die Taste , um zur nächsten Filmdatei zu springen. , um zur vorigen Filmdatei zu springen. gedrückt, um den Schnellvorlauf zu aktivieren. gedrückt, um den Schnellrücklauf zu aktivieren. d) Einstellen der Lautstärke Betätigen Sie während der Wiedergabe Sie VOL-Taste und benutzen Sie dann die Tasten / zum Verringern oder Erhöhen der Lautstärke.
e) Verlassen Wählen Sie "Exit", um zum Wiedergabebildschirm zurückzukehren. 10. Konvertieren von Videodateien ins AMV-Format Diese Software kann dazu verwendet werden, um Videodateien auf Ihrem Computer in AMVDateien umzuwandeln, bevor Sie sie auf den Player kopieren. Um die Software auf Ihrem Computer zu installieren, klicken Sie auf "convert tools" auf der mitgelieferten CD. (bzw. im Verzeichnis Ihres Players) Wählen Sie "Setup", um das Installationsprogramm zu starten.
Wählen Sie das Bildformat "128x128" und die Bildrate "middle" für Ihre AMV-Datei. Bestätigen Sie, indem Sie auf OK klicken. Klicken Sie auf , um die Konvertierung zu starten. Nach der Konvertierung werden die AMV-Dateien automatisch abgespielt. Die damit konvertierten AMV-Datei können nun auf den Player kopiert und abgespielt werden. Hinweis: Es wird nur das Bildformat 160x128 unterstützt. 11.
2. Aufnahmestart/-pause Betätigen Sie die Taste zum Starten der Aufnahme. Betätigen Sie die Taste , um die Aufnahme zu unterbrechen und die Aufnahmezeit wird anhalten und blinkt. Betätigen Sie die Taste erneut, um mit der Aufnahme fortzufahren. 3. Speichern der Aufnahmedateien Halten Sie die M-Taste gedrückt, um die Aufnahmedatei zu speichern. 12.
a) Wiedergabe und Pause aufgezeichneter Sprachmemos Betätigen Sie im Sprachaufnahmebildschirm die Taste zur Wiedergabe der Aufnahmedatei. Betätigen Sie die Taste , um die Wiedergabe vorübergehend anzuhalten. b) Dateiauswahl Betätigen Sie die Taste Betätigen Sie die Taste c) Schnellsuchlauf Halten Sie die Taste Halten Sie die Taste , um zur nächsten Datei zu springen. , um zur vorigen Datei zu springen. gedrückt, um den Schnellvorlauf zu aktivieren.
Ein "YES" oder "NO" erscheint und drücken Sie dann M-Taste bestätigen. Wenn Sie "YES" gewählt und bestätigt haben, werden alle Musikdateien gelöscht. Auf dem Bildschirm erscheint während des Vorgangs die Meldung "Deleting". Wenn der Löschvorgang abgeschlossen ist, erscheint die Meldung "Empty disk!" für ein paar Sekunden. d) Verlassen Wählen Sie "Exit", um zum Wiedergabebildschirm zurückzukehren. 15. Benutzung des Sprachaufnahmeuntermenüs während der Wiedergabe Während der Wiedergabe wollen Sie u. U.
Sie können diesen Player als Bild-/Fotobetrachter verwenden: Zur Anzeige von Bild- und Fotodateien gehen Sie im Hauptmenü mithilfe der Tasten / und der M-Taste auf "Photo", um das Listenmenü aufzurufen. Wählen Sie eine Datei mithilfe der Tasten / und betätigen Sie die Taste , um die Datei anzuzeigen. Betätigen Sie die Taste zum Stoppen und um zum Menü zurückzukehren. Sie können dann eine andere Datei auswählen. Zur Auswahl des vorigen / nächsten Bilds benutzen Sie die Tasten / .
a) Öffnen von eBooks Gehen Sie im Hauptmenü auf "eBook" mithilfe der Tasten / und der M-Taste. Ein Listenmenü erscheint. Wählen Sie eine Datei, die Sie lesen wollen, mithilfe der Tasten / und betätigen Sie zur Anzeige des Texts. Betätigen Sie die Taste , um zur nächsten Seite zu wechseln. Betätigen Sie die Taste , um zurück zur vorigen Seite zu gehen. Um zurück zum Listenmenü zu gelangen, betätigen Sie die Taste . Um zurück zum Hauptmenü zu gelangen, halten Sie dieM-Taste gedrückt. 19.
a) Lesezeichen auswählen Wählen Sie während der Textanzeige die Option "Bookmark select" mithilfe der Tasten / und der M-Taste. Wählen Sie ein gespeichertes Lesezeichen, das Sie aufrufen wollen und betätigen Sie dann die M-Taste zur Anzeige des gewünschten Textstelle. b) Lesezeichen löschen Wählen Sie während der Textanzeige die Option "Bookmark delete" und ein Listenmenü erscheint. Benutzen Sie dann die Tasten / zur Auswahl des Lesezeichens, das Sie löschen wollen.
23. Fehlerbehebung Das Gerät kann nicht eingeschaltet werden Kein Ton wird über die Kopfhörer wiedergegeben Die Zeichen in der Anzeige sind falsch Speichern von Musikdateien auf dem Player schlägt fehl 24. Technische Daten Abmessungen Gewicht LCD-Anzeige Computeranschluss Kopfhörer-Impedanz Interner Speicher: Akku Audio Musikformate Videoformat Aufnahmeformat Bildformate eBook-Format Betriebstemperatur Betriebssystem * Überprüfen Sie, ob der Ein/Aus-Schalter in der ON-Position ist.
26. Service und Hilfe Für Informationen: Für Hilfe: www.lenco.com http://lencosupport.zendesk.com Lenco Hotlines: Deutschland Die Niederlande Belgien Frankreich 0900-1520530 (Ortsgebundener Tarif) 0900-23553626 (Ortsgebundener Tarif + 1ct p/min) 02-6200115 (Ortsgebundener Tarif) 03-81484280 (Ortsgebundener Tarif) Die Hotline erreichen Sie montags bis freitags von 9 bis 18 Uhr. Wenn Sie Lenco kontaktieren, werden Sie immer nach der Modell- und Seriennummer des Geräts gefragt.