Operation Manual
8
Before pairing, please make sure your Bluetooth Receiver Device
supports Bluetooth A2DP profile.
Keep the device in 1 meter of your Bluetooth receiver device.
Switch on your Bluetooth receiver device and enable it to searching /
pairing mode.
a. Search Device
Choose “Search Device” to enter into the Bluetooth searching mode by
using / and buttons on player, the device searching mode is
starting, for approximate 10 ~ 20 seconds, a device(s) name list will
appear to choose for pairing.
Choose the device’s name which you want to pair then choose
“Pair/Connect” by using / and buttons, wait for few
seconds both device should be paired and the first song in music list will
playing automatically from you Bluetooth receiver device. And,
The screen is switch to “BT Now Playing” interface and a Bluetooth icon
“ “is displaying at the information bar, the Bluetooth is in transmitting.
“BT Now Playing”
To search for new Bluetooth Device;
Before you search for new device, please disconnect the current paired
device. For better result, turn the paired Bluetooth receiver to power off.
Choose “Search Device” the device searching mode will start again for
new device(s) name list to choose again;
Choose new found and wanted Bluetooth receiver device for pairing.
b. Device’s List
Choose “Device’s List” to enter into the paired device list, you can
disconnect or un-pair it, also can re-connect those devices if it’s in
operating range.
In device’s list, choose the device’s name and choose you desired
function “Disconnect” or “Connect / Unpair” as you want. However,
make sure that you have disconnected the linking device before connect
the new wanted device.
Reconnect a pair Bluetooth device;
Automatically connecting: every time when turn “On” the Bluetooth
transmission function, it will automatically reconnect to the last
connected device if the receiver device is still in reconnect mode.
However, some Bluetooth receiver device may need to turn it “Off and
Bluetooth Transmission is On