Model: XEMIO-955 / 965 / 966 MP4 Player / Touch Screen User manual For information and support, www.lenco.
Warnings Don’ts • • Do not place naked flames, such as lighted candles on or near the product. Do not place objects filled with liquids, such as vases on or near the product. • Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. • Do not use this product with wet hands. • • • • Do not clean this product with water or other liquids. Do not block or cover the slots and holes in the product.
A. Basic controls and interfaces of the player B. Internal Battery The player has an internal battery. When using the unit for the first time, charge it for 3 - 4 hours or until the battery icon is show the battery is in full. Battery Is In Full Note: Player continues to use battery power after it’s been turned off, if unit isn’t used for a while, the battery might need to be charged. Recharging the player at least 2 – 3 times in three months for maintain the battery life and performance. 1. • • 2.
mode automatically, as system defaulted, if you do not tap any selection on this screen in 6 seconds. Connection Select Screen • Tap “Power & Data / USB Charge / Charge & Play Screen” icon to enter the type of connection as you desired.
Important: The battery cannot be charged when your computer is in sleep mode. The USB port on most keyboards does not provide enough power to charge the player. Connect player direct to a USB port on your computer only to prevent charging problem. C. Connecting and disconnecting the player Connect the player to your computer to upload media files to your player; or to download recorded voice memos to your computer. 1.
Note: If no external memory card plugged in, it shows Internal Memory only, which includes EBOOK, FLASH, MUSIC, PICTURES, RECORD, SYSTEM, VIDEO and other files. All the files under the folder will be listed. Operations of external “Card Memory” are the same as “Internal Memory”. E. Getting Started This player is equipped with a touch screen so you can choose the items or functions by tapping the related icons or files. 1.
application. Desktop Menu Note: In most of the menu and interface screen, you can direct return to desktop menu by Press “EXIT” Button, otherwise press by the player. or “Back” icon if existed. This is shortcut function provided G. Music • Tap the “Music” icon to enter the music mode menu, a “All Music” list screen appear to select: • Tap a file name to start the play and the screen will switch to Music Control Interface; the Music Progress Tool will appear at the same time.
2. Change Next / Previous and Fast-Forward / Fast Backward • • • Tap icon to play next file. Tap icon to play previous file. Tap and hold icon to play fast-forward. • Tap and hold 3. • Change Volume Tap and drag icon left / right at volume bar to adjust the volume levels. icon to play fast-backward. For hearing protection; a display warning pop-up on TFT screen, when every time you increase the volume level and reach to the default setting level which may exceed 85dB.
view where the current play music file and the icon is marked at behind the current playing music file. Or, tap the file name to change other music to play. • To go the music Now Playing list screen tap then tap • icon from the Music Control Interface and icon in Music Tool Bar. icon: All Music; tap this icon to enter the All Music List Screen, you will see all the music files stored under Music Directory in the player’s “Internal Memory” by default.
When each time goes into the Music Control Interface, the Music Progress Tool will appear at the same time. Then the Music Progress Tool will get concealed after 10 seconds; and it will appear again when you tapping the area where it displays. Music Progress Tool 1. Play Mode • Tap “Repeat” icon to switch between “Sequence / Repeat One / Repeat All / Shuffle / Shuffle + Repeat / Intro” as you desired. 2.
• Choose “Variable Speed Playback” to adjust music playback speed “-4X to 4X”. (For MP3 format only) • Tap “Add Tag” the current music and its current time point will add to tag list, then it returns to Music Control Interface. You will find the music in the corresponding tag in Tag List. • Choose “Delete” to delete the current music from the player, choose “OK” to confirm or choose “Cancel” to exit. • Choose “Information” to display the detailed information of the current music.
2. Play Next / Previous • • Tap the screen and slide left to play next p file. Tap the screen and slide right to play previous photo file. 3. Photo Play Mode Menu • Tap / / icon to switch between Photo Play Mode Menu to “List Mode / Thumbnail Mode / Slide Mode” which are shown as follows: List Mode Tap the screen and drag up or down to change page, if available, in List Mode. Tap a file name to play the desired.
Tap the thumbnail list and drag left or right to sliding the thumbnail list Slide Mode 4. to left or right. Tap a thumbnail to view as desired. Tap on the large photo will switch to Photo Browsing Screen. Use Photo Tool Bar You can switch between “Now Viewing / All Photos / Directory Browse”. • • Tap any one of them at Photo Tool Bar to enter the related function as you want: icon: Now Browsing; Tap this icon to enter the Now Browsing Screen, tap the file name to select one and start to play.
Name, Resolution, Created Date. • • Choose “Screen Size” to set options “Full Screen / Original Size / Scale” as you desired. Choose “Back” to return to previous menu. 6. Use Photo Browsing Tool Bar • Tap / • Tap icon to select “Manual Playing”, tap and slide the current photo to left / right to icon to switch between “Manual / Auto” Playing: display the next / previous photo file in manual mode. Tap • icon to select “Auto playing”, the photo files will playing as slide show.
1. • Use Video Tool Bar : Now Playing; tap this icon to enter the video Now Playing List Menu, you can view where the current play video file. Or, tap the file name to change other video to play. You will see the icon is marked at behind the current playing video file when you go back to the video Now Playing List Menu by tap icon from the Video Browsing Interface.
3. Call up Video Control Menu • In Video Browsing Interface, tap any where on the screen; the Video Control Menu will display to use for 8 seconds. 4. Play / Pause • To play video, tap 5. Change Next / Previous and Fast-Forward / Fast Backward • Tap • • icon to play previous file. Tap Tap and hold icon to play fast-forward. • • icon to play fast-backward. Tap and hold Or, tap and drag left / right at the playing progress bar progress direct to point where you desired. 6.
• Tap icon to enter the Video Play Setting Menu, option includes “, , , , , , ”. • Choose “Playback Mode” to set option for “Sequence / Repeat One / Repeat All / Shuffle, Shuffle + Repeat” • Choose “Add Tag” the current video and its current time point will add to tag list, then it returns to Video Browsing Interface. You will find the video in the corresponding tag in Tag List.
2. Record Tool Bar • • Tap / icon to switch between Start / Pause during in recording mode. Tap icon to stop the recording, a confirmation dialog box will appear; tap “OK” to confirm, the recording is stop and the recorded file will save to the system defaulted folder automatically. (Internal Memory:\ROOT\RECORD\MIC\). Or, tap “Cancel” to exit and back to recording mode. / icon to switch between the Record Quality “Low / Medium / High” as • Tap / you desired.
FM Radio Interface 1. Manual Search Station • Tap icon and slide up / down slowly to manual Search for the radio frequency, you will see the frequency number is stepping up / down by 0.1(0.05)MHz. Tune the frequency number to your desired radio station frequency. 2. Save Channel • Tap icon to save the current tuned channel in channel list, if it channel is broadcasting and not saved. 3. Channel List • • In Channel List, there have three lists; up to 9 channels can be saved in each list.
5. Use FM Radio Tool Bar Auto Search Station and Station Storage • Tap icon to enter to auto search and auto preset mode. The radio will searching stations in the range of frequency “76MHz – 92MHz / 87MHz – 108MHz”, all found radio stations will be stored into “Channel List” table to use. The radio search will stop and show the first received radio station to listening. • To stop the auto search function during searching, tap icon again, the system will stops at the last received channel.
• To change Record Gain, tap “Record Gain”, a submenu list appears then choose “1 / 2 / 3 / 4 / 5” as you desired. • Tap “Save Path” to change the default folder location, for FM Record, options include “Internal Memory” and “Card Memory”. It just shows Internal Memory if no card is plugged in. • • Tap “Record Format” to change the file format “WAV / MP3” as desired. Tap “Back” to return to Radio Interface.
icon: All EBooks; tap this icon to enter the All Ebooks List Screen, you will see all the • EBook files stored under EBook Directory in the player’s “Internal Memory” by default. icon: Directory Browse; tap this icon to enter the Directory Browse mode, then you will • see a directory list appear to select; Choose “Internal Memory” or “Card Memory” as you desired.
• Tap • Choose icon to switch between “Manual / Auto” Playing. / icon to select “Manual”, tap and slide the current page to up, left / down, right to change next / previous page in manual mode. • Choose icon to select “Auto” playing, the page will changing next automatically. The icon will appear in ebook browsing tool menu when auto paging is activated. Tap icon to select the paging time “ 3 / 6 / 9 / 12 / 15 (seconds)” as you want.
Browser function is a file manager; let you know very well that all types of file and folder inside the player, also you can easy manage all types of file, to play or delete them, at those folders • • Tap “Browser” icon to enter File Navigator menu, a folders list screen appear to choose. Tap the screen and drag up / down to change page if it available. • Tap icon to return to previous directory, or return to desktop menu from root directory. Or, Press “EXIT” button File Navigator Menu 1.
Internal Memory / Card Memory, a “Click” icon appears instead. And then tap icon to copy the desired file to Card Memory / Internal Memory, a confirmation dialog box appear; tap “OK” to confirm. Or, tap “Cancel” to exit. (those copied files will be stored into the system default folder) • Tap “Click” icon when it appear to cancel the select function. Note: A message “Insert external device” dialog box will appear if Card Memory is plugged in.
• Tap / icon to switch to the previous or next Month in year as desired. 3. Calculator • Tap “Calculator” icon to enter the calculator interface. • To exit, tap icon to return to previous directory, or return to desktop menu from root directory. Or, Press “MENU” button 4. Stopwatch • Tap “Stopwatch” icon to enter the stopwatch interface. • icon to return to previous directory, or return to desktop menu from root directory.
• • • Tap “Flash” icon to enter FLASH game list. Choose a game file to start the play. Press “EXIT” button to exit the game and back to desktop menu. • Tap icon to return to previous directory, or return to desktop menu from root directory. Or, Press “EXIT” button • icon to adjust the volume level of Flash game sounds, a “Volume Control Bar” appear Tap to use, Tap and drag left / right the Volume Control Bar to adjust the levels. 1.
Or, Press “EXIT” button Setting Menu 1. Set Display • Tap “Display” in Setting Menu to enter the display menu: • Bright Time: Choose this item to set the backlight shutdown time. Tap and drag the to left / right at progress bar to change option “ 0 – 60 seconds” as desired. • Brightness: Choose this item to set the backlight level. Tap and drag the right at progress bar to change option “1 – 5” level as desired. • Tap icon icon to left / icon to back to previous menu. 2.
the month and day to current date by using the same method. • • Tap icon to back to previous menu. Adjust Time: Choose this item to adjust hour, minute and AM/PM, three wheel screens appear to use; you can adjust hour to current time by tap and sliding the hour wheel up / down. Follow adjust the minute and AM/PM to current time by using the same method. • Tap 5. Language This player can use difference languages.
before formatting, all data will be loss. • Tap “Format Card”, a message “Format Card?” dialog box appear; Tap “OK” to confirm. Or, Tap “Cancel” to abort. R. Use Micro SD Card Slot (T-Flash Card) This player allows you to play those support media files from a Micro SD Memory card (T-Flash). 1. Insert / Remove the Micro SD card • For safe to insert / remove the micro SD memory card into/from the card slot. Recommended you to turn Off the player before you do that.
Rechargeable Battery Lithium: 3.7V, 480mAh Music playing time: > 7 - 8 hours (power save mode, 2/3 earphone output) Video playing time: > 2 ~ 2.5 hours Voice Recording format MP3, WAV MP3, WMA Music Format 32kbps - 320kbps WAV APE, FLAC, OGG, AAC Video Format AVI(Xvid), WMV, FLV, 3GP, RM/RMVB, Photo Format JPEG, BMP, GIF, TIF, PNG eBook Format TXT Game Format SWF (Flash 7.0, flash life 2.1, AS2.
The serial number can be found on the back of the device. Please write down the serial number below: Model: XEMIO-955, XEMIO-965 or XEMIO-966 Serial number:_________________________________ Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.
