User manual
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
9
SUPPORT RESOLUTION
VGA INPUT/OUTPUT HDMI OUTPUT
PC SD/HD PC
480I/576I (NTSC/PAL) v v
480P/576P v v
720P@(50/60) v v
1080I@(25/30) v v
1080P@(50/60) v v
VGA@(60/72/75/85) v v
SVGA@(56/60/72/75/85) v v
XGA@(60/70/75/85) v v
SXGA@(60/75/85) v v
UXGA@60 v v
WXGA@60(1280x800) v v
WSXGA@60(1680x1050) v v
WUXGA@60(1920x1200) v v
Note: If PC connected to the VGA input, local output will only support PC resolutions. If HD/SD source connected to the
VGA input, local output will support only HD/SD resolutions.
RESETTING THE UNIT
1. Press and hold “Menu” button for 5 seconds
2. Disconnect power plug from the unit while holding the “Menu” and wait for 5 seconds
3. Connect the power plug back in and continue holding the “Menu” for another 5 seconds
4. Release the “Menu” and allow up to 10 seconds for the unit to connect to the display
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership
record if your product is lost or stolen and helps ensure you’ll receive notication of performance issues and rmware
updates.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-
ranty rights.
To register go to www.atlona.com/registration