Thermostat User Manual
506920−01 09/12
Page 10
Add Non−Communicating Outdoor unit
System Devices
Add or Remove
Non−communicating
equipment?
yes
nextback
1
non−communicating device list
Not Installed
current value:
back
edit
Not Installed 1 Stage A/C Unit
2 Stage A/C Unit 1 Stage HP Unit
2 Stage HP Unit
Select one
Outdoor Unit Type
cancelsave
To add (or remove) an outdoor unit that is not icomfort−enabled, you must be at
the Add or Remove Non−communicating equipment?" screen.
1. Press the yes button on this screen (see 1).
2. In the non−communicating device list" screen, use the arrows (2a) to
highlight Outdoor Unit Type and press edit (2b).
3. Touch one of the radio buttons (3a) to select a 1−or 2−Stage AC Unit or a
1−or 2−Stage HP Unit; press save (3b).
4. Use arrows (4a) to highlight any red colored text in the device list (e.g.
select Outdoor Unit Capacity; text turns white). Press edit (4b).
5. Use arrows (5a) to make changes; press save (5b). Change other red
settings (if present) using a similar process.
NOTE − If the defaults are correct, you do not have to make any changes, but you
must press save (5b). When all red text is gone, the back button will appear; press
it to return to the Add or Remove Non−communicating equipment?" screen (1).
3b
3a
to add/remove/adjust a device,
select it, then press edit
current value:
non−communicating device list
edit
to add/remove/adjust a device,
select it, then press edit
back
please view and save all
red settings
9:39 am Aug 15, 2012
2 Stage AC Unit
4a
4b
2a
2b
Outdoor Unit Type
Outdoor Unit Capacity
Outdoor Unit 1st Stage Capacity
Humidifier
Dehumidifier
Outdoor Unit Type
Humidifier
Dehumidifier
System
Furnace
Outdoor Unit Capacity
Range is 18 to 60
Default is 36, inc:1
cancelsave
set−to
36
5b
5a
Figure 8. Add non−communicating deviceOUTDOOR UNIT