User's Manual

4
Parts Identification
Filter Section Access
Panel
Retaining Clips (4)
Inlet Collar
Cabinet
Outlet Collar
On/Off Switch
Motor Section
Access Panel
HEPA Filter
(STAGE2)
Carbon Pre-Filter
(STAGE 1)
HEPA Filter Mesh
(Protects HEPA
Filter)
Inner Charcoal Filter
(STAGE 3)
RECOMMENDED for
greater capacity removal
of chemicals and odors.
Located inside the HEPA
filter cartrige to provide
the third and final stage of
filtration.
Replace inner charcoal
filter when using the
optional carbon canister.
Cabinet Parts
Inside Cabinet (Filter Section) Optional Coconut Shell Carbon Canister
HEPA Cartridge Parts
figure 1.
figure 3. figure 4.
figure 2.
Motor/Impeller
Filter Adapter
(threaded)
‘O’ Ring
Specifications
HEPA-20 HEPA-40 HEPA-60
Nom. Air Flow @ 120VAC @ 0.0” E.S.P. 180 cfm 320 cfm 500 cfm
Weight (max - unpackaged) 25 lbs. 35 lbs. 40 lbs.
Supply Voltage 120 VAC 120 VAC 120 VAC
Nom. Measured Power Consumption 125 Watts 125 Watts 225 Watts
Motor Current Draw 1.0 amps, 60hz 1.0 amps, 60hz 1.8 amps, 60hz
Air Inlet Collar (max) 8”-round 10”-round 10”-round
Air Outlet Collar (max) 6”-round 8”-round 8”-round
Operating Temp. Range - Return air (ºF) 30 to 95 30 to 95 30 to 95
HEPA filter efficiency = 99.97% @ 0.3 micron particles
Ambient temperature range: -40ºF to 130ºF