User Guide

4
4. FAN Button
• Cycles fan speeds in the following or-
der:
• AUTO - 20% - 40% - 60% - 80% -
100%
5. TURBO Button
Enables the unit to reach the preset
temperature during cooling or heating
operation in the shortest time
6. MODE Button
• Select system operation modes
• Press button to cycle through each
setting
AUTO COOL DRYHEATFAN
7. ECO INTELLIGENT EYE Button
• Automatically detects human activity
in the room
• If there is no activity for 30 minutes
sensor reduces compressor operat-
ing frequency for cooling/heating/auto

• Remains in this mode until activity is
detected again
NOTE: Not applicable to multi-zone
applications
8. OK Button

9. TIMER Button
• Initiates an auto-on or auto-off time
sequence
• Press TIMER button to initiate the ON
time sequence
• Press the UP/DOWN buttons multiple
times to set the desired time to turn
on the unit
• Press TIMER button to initiate the off
time sequence.
NOTE: Each press of the button in-
creases or decreases the time
(depending on function) in 30
minute increments up to 10
hours.
Above 10 hours each press
of the button will increase
or decrease the auto-timed
setting by 60 minutes up to 24
hours.