Instruction Manual

Page 5
Pressure Switch Wiring - KG/KC Units
Built After 6/24/2013
1- Disconnect unit wires marked S11 and S84/S94 as
shown in figure 5.
2- Wire pressure switches. Refer to table 3 For
appropriate wiring diagrams.
3- Bundle wiring and secure away from unit
components.
4- Close all unit panels and restore power to unit.
TABLE 3
Unit
Wiring
KGA/KCA 180S Figure 6
KGA/KCA 210, 156H
KGB/KCB 180S, 210S
Figure 7
KG/KC 240H, 300H Figure 8
KG/KC 240S, 300S, 180H & 210H Figure 9
S84/S94 WIRES ON
KGA/KCA 240S, 300S, 180H, 210H, 240H, 300H &
KGB/KCB 240S, 300S
S11
WIRES
FIGURE 5
DISCONNECT S11 AND S84/S94 WIRES - UNITS BUILT AFTER 6/24/2018