User's Manual

Important safety and handling information
Prevent hearing damage
Your device has a headphone connector. Always use the headphone
connector for headphones (also called a headset) or earphones.
CAUTION:
Excessive sound pressure from earphones and headphones can cause
hearing loss. Adjustment of the equalizer to maximum increases the
earphone and headphone output voltage and the sound pressure level.
Therefore, to protect your hearing, adjust the equalizer to an appropriate
level.
Excessive use of headphones or earphones for a long period of time at high
volume can be dangerous if the output of the headphone or earphone
connectors do not comply with specifications of EN 50332-2.
The headphone output connector of your device complies with EN 50332-2
Sub clause 7. This specification limits the device's maximum wide band true
RMS output voltage to 150 mV. To help protect against hearing loss, ensure
that the headphones or earphones you use also comply with EN 50332-2
(Clause 7 limits) for a wide band characteristic voltage of 75 mV. Using
headphones that do not comply with EN 50332-2 can be dangerous due to
excessive sound pressure levels.
If your device came with headphones or earphones in the package, as a set,
the combination of the headphones or earphones and the device already
complies with the specifications of EN 50332-1. If different headphones or
earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5
Limitation Values). Using headphones that do not comply with EN 50332-1
can be dangerous due to excessive sound pressure levels.
Sound pressure warning statement
For the device that is tested in accordance with EN 60950-1:
2006+A11:2009:+A1:2010+A12:2011, it is mandatory to perform audio tests
for EN50332.