User Manual
Table Of Contents
- Discover your Lenovo computer
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Secure your computer and information
- Chapter 5. UEFI BIOS
- What is UEFI BIOS
- Enter the BIOS menu
- Navigate in the BIOS interface
- Change the display language of UEFI BIOS
- Change the display mode of UEFI BIOS (for selected models)
- Set the system date and time
- Change the boot priority order
- Enable or disable the configuration change detection feature
- Enable or disable the automatic power-on feature
- Enable or disable the smart power-on feature (for selected models)
- Enable or disable the ErP LPS compliance mode
- Change the ITS performance mode
- Change BIOS settings before installing a new operating system
- Update UEFI BIOS
- Recover from a BIOS update failure
- Clear CMOS
- Chapter 6. Troubleshooting, diagnostics, and recovery
- Chapter 7. CRU replacement
- CRU list
- Remove or replace a CRU
- Power adapter and power cord
- Power adapter bracket
- Vertical stand
- VESA mount bracket
- External optical drive box and external optical drive
- Dust shield
- External Wi-Fi antenna
- Computer cover
- Hard disk drive and hard disk drive bracket
- Internal speaker
- System fan
- Coin-cell battery
- Wi-Fi card and Wi-Fi card shield
- Bottom cover
- Memory module
- M.2 solid-state drive
- Chapter 8. Help and support
- Appendix A. Accessibility and ergonomic information
- Appendix B. Compliance information
- Appendix C. Notices and trademarks
Internal speaker
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See “Computer cover” on page 43.
2. Disconnect the internal speaker cable from the internal speaker connector on the system board.
46
M70q Gen 2 and M90q Gen 2 User Guide