User Manual
Table Of Contents
- Discover your Lenovo computer
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Secure your computer and information
- Chapter 5. UEFI BIOS
- What is UEFI BIOS
- Enter the BIOS menu
- Navigate in the BIOS interface
- Change the display language of UEFI BIOS
- Change the display mode of UEFI BIOS (for selected models)
- Set the system date and time
- Change the boot priority order
- Enable or disable the configuration change detection feature
- Enable or disable the automatic power-on feature
- Enable or disable the smart power-on feature (for selected models)
- Enable or disable the ErP LPS compliance mode
- Change the ITS performance mode
- Change BIOS settings before installing a new operating system
- Update UEFI BIOS
- Recover from a BIOS update failure
- Clear CMOS
- Chapter 6. Diagnostics
- Chapter 7. CRU replacement
- CRU list
- Remove or replace a CRU
- Power adapter and power cord
- Power adapter bracket
- VESA mount bracket
- Vertical stand
- External Wi-Fi antenna
- External optical drive box and external optical drive
- Dust shield
- Computer cover
- Hard disk drive and hard disk drive bracket
- Internal speaker
- System fan
- Coin-cell battery
- Wi-Fi card and Wi-Fi card shield
- Bottom cover
- M.2 solid-state drive
- Memory module
- Chapter 8. Help and support
- Appendix A. Compliance information
- Appendix B. Notices and trademarks
• HDMI out connector
• Serial connector
• VGA-out connector
• USB-C connector (only for optional connector 1)
• Ethernet connector (only for optional connector 2)
• USB 3.2 Gen 1 connector (only for M80q Gen 3 and M90q Gen 3)
Related topics
• “USB specifications” on page 6.
• “Connect an external display” on page 9.
• “Lock the computer” on page 15.
• “Enable or disable the smart power-on feature (for selected models)” on page 23.
4
M70q Gen 3 / M80q Gen 3 / M90q Gen 3 User Guide