User Manual

Table Of Contents
Removal steps
Note: After installing a new coin-cell battery, reset the system date and time in the UEFI BIOS menu.
Wi-Fi card and Wi-Fi card shield
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the following parts in order, if any:
“Computer cover” on page 41.
“Hard disk drive and hard disk drive bracket” on page 42.
Removal steps
Note: While installing, ensure that you connect the gray cable to the connector labeled 1 (auxiliary) and the
black cable to connector labeled 2 (main) on the card.
48
M70q Gen 3 / M80q Gen 3 / M90q Gen 3 User Guide