User Manual

Note: The Wireless Auto Disconnection feature is not supported for the Ethernet connection through a

USB port.

• MAC address Pass Through

Values: Disabled, Enabled

Descriptions: Enable or disable the MAC Address Pass Through function when a dock is attached. If you

select Enabled, the dock Ethernet will use the same MAC address as the internal Ethernet LAN.

USB

• USB UEFI BIOS Support

Values: Disabled, Enabled

Descriptions: Enable or disable the boot support for USB storage devices.

• Always On USB

Values: Disabled, Enabled

Descriptions: Select Enabled to charge devices through the Always On USB connectors even when the

computer is turned off, in sleep mode, or in hibernation mode.

Note: USB-wake-up function is not supported on Always On USB connectors.

• –Charge in Battery Mode

Values: Disabled, Enabled

Descriptions: Select Enabled to charge devices through the Always On USB connectors even when the

computer is in hibernate or shutdown state and in battery mode.

Keyboard/Mouse

• TrackPoint

Values: Disabled, Enabled

Descriptions: Enable or disable the built-in TrackPoint pointing device.

Note: If you want to use an external mouse, select Disabled.

• Trackpad

Values: Disabled, Enabled

Descriptions: Enable or disable the built-in trackpad.

Note: If you want to use an external mouse, select Disabled.

• Fn and Ctrl Key swap

Values: Disabled, Enabled

Descriptions: If you select Enabled, the Fn key works as the Ctrl key and the Ctrl key works as the Fn key.

• Fn Sticky key

Values: Disabled, Enabled

Descriptions: If you select Enabled, you can press the Fn key (instead of press and hold) to keep it in a

pressed condition. Then press the function key you want. The action is equivalent to pressing the function

key simultaneously with the Fn key.

• F1–F12 as primary function

Values: Disabled, Enabled

Descriptions: If you select Enabled, pressing the function keys directly inputs F1–F12. If you select

Disabled, pressing the function keys directly initiates the special function printed as an icon on each key.

To temporarily switch the above two functions, press Fn+Esc.

User Guide