User Manual

Descriptions: Enable this option to use password authentication when fingerprints are not available. This
item is displayed if Security Mode is set to High.
• Reset Fingerprint Data
Descriptions: Use this option to erase all fingerprint data stored in the fingerprint reader and reset the
settings to the factory default state. As a result, any power-on security features previously enabled will not
work until they are re-enabled in the fingerprint software.
Security Chip
• Security Chip Type
Values: TPM 2.0
Descriptions: You can use a discrete Trusted Platform Module (TPM) chip with TPM 2.0 mode.
Note: This item is not displayed on the TPM 1.2 support model.
• Security Chip Selection
Values (Windows 10 and Windows 7 64-bit): TPM 2.0, TPM 1.2
Values (Windows 7 32-bit): TPM 2.0, TPM 1.2
Descriptions: Set the TPM operational mode.
Note: This item is displayed only on the TPM 1.2 support model.
• Security Chip (for TPM 2.0)
Values: Disabled, Enabled
Descriptions: Enable or disable the security chip.
• Security Chip (for TPM 1.2)
Values: Active, Inactive, Disabled
Descriptions: If you select Active, the Security Chip is functional. If you select Inactive, the Security
Chip is visible, but it is not functional. If you select Disabled, the Security Chip is hidden and not
functional.
• Security Reporting Options
– SMBIOS Reporting
Values: Disabled, Enabled
Descriptions: Enable or disable the feature that reports the SMBOS data.
• Clear Security Chip
Descriptions: Use this option to clear the encryption key.
• Intel (R) TXT Feature:
Values: Disabled, Enabled
Descriptions: Enable or disable the Intel Trusted Execution Technology.
• Physical Presence for Provisioning:
Values: Disabled, Enabled
Descriptions: If you select Enabled, a confirmation message is displayed when you change the setting of
the security chip.
Note: This item is displayed only on the TPM 1.2 support model.
• Physical Presence for Clear
Values: Disabled, Enabled
Chapter 6. Advanced configuration 67