User Manual

2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Remove the removable battery. See “Replacing the removable battery” on page 102.
5. Remove the base cover assembly. See “Replacing the base cover assembly” on page 105.
6. If you want to replace the storage drive cable, disconnect the cable from the system board.
7. Pull the tape to remove the 2.5-inch storage drive and its bracket.
8. Disconnect the cable from the 2.5-inch storage drive.
Chapter 9. Replacing devices 111