User Manual

7. To install a new M.2 solid-state drive, do the following:
a. Align the contact edge of the new M.2 solid-state drive with the key in the M.2 slot. Then carefully
insert the M.2 solid-state drive into the slot at an angle of about 20 degrees
1 and then pivot it
downward
2 .
b. Install the screw to secure the M.2 solid-state drive in place
3 .
8. Reinstall the base cover assembly.
9. Reinstall the removable battery.
10. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the keyboard
Before you start, read “Important safety information” on page v and print the following instructions.
To remove the keyboard, do the following:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 102.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Remove the removable battery. See “Replacing the removable battery” on page 102.
5. Remove the base cover assembly. See “Replacing the base cover assembly” on page 105.
Chapter 9. Replacing devices 121