User Manual

Values: Disabled, Enabled
Description: This option is supported only when Always On USB is enabled. Select Enabled to charge
devices through the Always On USB connector even when the computer is in hibernation mode, or
powered off and in battery operation.
Keyboard/Mouse
TrackPoint
Values: Disabled, Enabled
Description: Enable or disable the built-in TrackPoint pointing device.
Note: If you want to use an external mouse, select Disabled.
Trackpad
Values: Disabled, Enabled
Description: Enable or disable the built-in trackpad.
Note: If you want to use an external mouse, select Disabled.
Fn and Ctrl Key swap
Values: Disabled, Enabled
Description: If you select Enabled, the Fn key works as the Ctrl key and the Ctrl key works as the Fn key.
Fn Sticky key
Values: Disabled, Enabled
Description: If you select Enabled, you can press the Fn key (instead of press and hold) to keep it in a
pressed condition. Then press the function key you want. The action is equivalent to pressing the function
key simultaneously with the Fn key.
F1–F12 as Primary Function
Values: Disabled, Enabled
Description: If you select Enabled, pressing the function keys directly inputs F1–F12. If you select
Disabled, pressing the function keys directly initiates the special function printed as an icon on each key.
To temporarily switch the above two functions, press Fn+Esc.
Display
Boot Display Device
Values: ThinkPad LCD, USB Type-C, HDMI, Display on dock
Description: Select the display device that you want to activate at boot time. This selection is effective for
boot time, password prompt, and ThinkPad Setup. USB Type-C corresponds to the USB Type-C
connector on your computer. HDMI corresponds to the HDMI connector on your computer. Display on
dock corresponds to the video connectors (such as the DisplayPort, DVI, or VGA connectors) on a
docking station. Boot screen is cloned to all displays on dock.
Shared Display Priority
Values: HDMI, Display on dock
Description: Select the priority between shared display outputs. HDMI and Dock displays share a single
display output. This option selects the one that is prioritized.
Boot Time Extension
Values: Disabled, 1 second, 2 seconds, 3 seconds, 5 seconds, 10 seconds
Description: During the boot process, the computer might not detect the external monitors that need more
time to get ready. Select how long you want to extend the boot process.
68
A475 User Guide