User Manual

6. Install a new M.2 solid-state drive by doing the following:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then carefully insert
the drive into the slot at an angle of about 20 degrees
1 .
b. Pivot the M.2 solid-state drive downward
2 .
c. Install the screw to secure the M.2 solid-state drive
3 .
7. Reinstall the base cover assembly.
8. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the keyboard
Before you start, read “Important safety information” on page v and print the following instructions.
Removing the keyboard
1. Disable the built-in battery. See “Disabling the built-in battery” on page 96.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
Chapter 9. Replacing devices 103