User Manual

5. Align the top-left corner of the computer with the guide post of the docking station. Attach your
computer to the docking station as shown
1 until you hear a click. Slide the latch in the direction as
shown
2 .
6. Check the docking status indicator. The docking status indicator turns on when the computer is
successfully docked.
Note: If the indicator is off, your computer is not attached to the docking station successfully. To solve
the problem, detach and reattach the computer.
7. Turn the system lock key to the locked position (
).
Attention: When the computer is attached to a docking station, do not pick up the assembly by taking hold
of the computer only. Always hold the whole assembly. Otherwise the docking station might drop down.
Detaching your computer from a docking station
To detach your computer from a docking station, do the following:
Chapter 3. Enhancing your computer 41