User Guide

I/O Port Access

Description: Use this submenu to enable or disable the following hardware features:

• Ethernet LAN

• Wireless LAN

Note: Depending on the model, if you change Wireless LAN to Disabled, Bluetooth will also be changed

to Disabled.

• Wireless WAN

• Bluetooth

• USB Port

• Memory Card Slot

• Smart Card Slot

• Integrated Camera

• Audio

• Microphone

• Fingerprint Reader

• Thunderbolt(TM) 3

• NFC Device

• Touch Panel

Internal Device Access

• Bottom Cover Tamper Detection

Values: Disabled, Enabled

Description: When this option is enabled, supervisor password is required when a bottom cover tamper is

detected. This option is not functional until a supervisor password is set.

• Internal Storage Tamper Detection

Values: Disabled, Enabled

Description: When this option is enabled, removing any internal storage device when your computer is in

sleep mode will be detected. If you remove the internal storage device while the computer is in sleep

mode, the computer will shut down when you wake it up, and any unsaved data will be lost.

Anti-Theft

• Computrace Module Activation

Values: Disabled, Enabled, Permanently Disabled

Description: Enable the UEFI BIOS interface to activate the Computrace module. Computrace is an

optional monitoring service from Absolute Software. If you select Permanently Disabled, you cannot

enable this setting again.

Secure Boot

• Secure Boot

Values: Disabled, Enabled

Description: Enable this option to prevent unauthorized operating systems from loading when you turn on

the computer. To enable this option, set the startup setting as UEFI Only and set CSM Support as No

first.

P52 User Guide