User Guide

Pair with an NFC card or NFC-enabled smartphone

Before you start, ensure that:

• The card is in NFC Data Exchange Format (NDEF), otherwise the card cannot be detected.

• The smartphone screen is facing upward.

To pair with an NFC card or smartphone:

1. Place the card or smartphone closely near the NFC mark or label area on your computer.

2. Slowly move the card or smartphone around the NFC mark or label until you are prompted that the

device has been successfully detected.

Attention: During the data transfer, do not put your computer to sleep mode or lock the smartphone;

otherwise, your data might get damaged.

Airplane mode

When the Airplane mode is enabled, all wireless features are disabled.

To enable or disable the Airplane mode:

1. Open the Start menu.

2. Click Settings ➙ Network & Internet ➙ Airplane mode.

3. Turn on or turn off the Airplane mode switch.

X1 Yoga and X1 Carbon User Guide