User Manual
Table Of Contents
- Discover your Lenovo notebook
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Secure your computer and information
- Chapter 5. Configure advanced settings
- Chapter 6. CRU replacement
- Chapter 7. Help and support
- Appendix A. Accessibility and ergonomic information
- Appendix B. Compliance information
- Appendix C. Notices and trademarks
Side connectors of docking stations
Figure 1. ThinkPad Basic Docking Station
Figure 2. ThinkPad Pro Docking Station
Figure 3. ThinkPad Ultra Docking Station
1. Audio connector 2. ac power connector
3. DisplayPort
®
connector 4. VGA connector
5. USB 2.0 connector 6. Always On USB 3.2 connector Gen 1
7. USB 3.2 connector Gen 1
8. Ethernet connector
9. Security-lock slot 10. USB-C connector
11. HDMI connector
12. Always On USB 3.2 connector Gen 2
13. USB 3.2 connector Gen 2
Attach a docking station
Notes:
• ThinkPad Basic Docking Station does not ship with a system lock installed. If you do not purchase and
install a system lock, skip step 4 and step 7 in the following instruction.
• If you do not connect the docking station to ac power, the computer attached runs on battery power.
1. Connect the docking station to ac power.
2. Disconnect the cables and devices from the left side of the computer.
3. Turn the system lock key to the unlocked position (
).
28
T14 Gen 2, T15 Gen 2, P14s Gen 2, and P15s Gen 2 User Guide