T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1 User Guide
Read this first Before using this documentation and the product it supports, ensure that you read and understand the following: • Safety and Warranty Guide • Setup Guide • Generic Safety and Compliance Notices Second Edition (June 2022) © Copyright Lenovo 2022. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.
Contents About this documentation . . . . . . . . iii Chapter 1. Meet your computer . . . . . 1 Front view . . . Side view . . . Bottom view . . Rear view . . . USB connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 7 9 10 Chapter 2. Get started with your computer . . . . . . . . . . . . . . . . 11 Get started with your desktop . . . . . . Manage networks . . . . . . . . . . .
ii T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
About this documentation • Illustrations in this documentation might look different from your product. • Depending on the model, some optional accessories, features, software programs, and user interface instructions might not be applicable to your computer. • Documentation content is subject to change without notice. To get the latest documentation, go to https:// pcsupport.lenovo.com.
iv T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Chapter 1.
TrackPoint buttons Touch screen * for selected models 1 2 for selected models of T14 Gen 3 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide Speaker
T16 Gen 1 and P16s Gen 1 Infrared camera* / Camera* Webcam privacy shutter* Microphone* Power button or power button with fingerprint reader TrackPoint® pointing stick NFC (near field communication) mark* Trackpad TrackPoint buttons Speaker Touch screen Webcam privacy shutter Slide the webcam privacy shutter to cover or uncover the camera lens. It is designed to protect your privacy. Chapter 1.
4 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Side view Intel models Ethernet connector * USB-C® (Thunderbolt™ 4) power connector USB-C (Thunderbolt 4) connector HDMI™ connector Always on USB 3.2 connector Gen 1 Audio connector Smart-card slot * USB 3.2 connector Gen 1 Security-lock slot Chapter 1.
AMD models Ethernet connector * USB-C (3.2 Gen 2) power connector USB-C (3.2 Gen 2) connector HDMI connector Always on USB 3.2 connector Gen 1 Audio connector Smart-card slot * USB 3.
Bottom view T14 Gen 3 and P14s Gen 3 T16 Gen 1 and P16s Gen 1 Emergency-reset hole Emergency-reset hole If the computer stops responding and you cannot turn it off by pressing the power button, reset your computer: 1. Disconnect your computer from ac power. 2. Insert a straightened paper clip into the hole to cut off power supply temporarily. 3. Connect your computer to ac power and then turn on your computer. CAUTION: Chapter 1.
When the computer is operating, it should be placed on a hard and flat surface with its bottom area not in contact with user’s bare skin. Under normal operating conditions, the temperature of the bottom surface will remain within an acceptable range as defined in IEC 62368-1, but such temperatures can still be high enough to cause discomfort or harm to the user if directly touched for over one minute at a time.
Rear view Nano-SIM-card tray * Chapter 1.
USB connectors Note: Depending on the model, some USB connectors might not be available on your computer. Connector name Description Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB storage device, or USB printer. • USB 2.0 connector • USB 3.2 connector Gen 1 • USB 3.2 connector Gen 2 • Charge USB-C compatible devices with the output voltage and current of 5 V and 1.5 A.
Chapter 2. Get started with your computer Get started with your desktop Launch an app • Use the super key (with the Windows logo) or open the Activities menu on the top left and type in the name of the application you want to launch. • Click the "show application" menu (For the Fedora operating system, you can see the menu after opening Activities menu) on the lower left and type in the name of the application you want to launch.
2. Select a network available for connection. Provide required information, if needed. Airplane mode When the Airplane mode is enabled, all wireless features are disabled. To enable or disable the Airplane mode: 1. Use the system menu drop down (top right) and choose Settings. 2. Click the Wi-Fi option. 3. Turn on or turn off the Airplane mode switch. Interact with your computer Your computer provides you various ways to navigate the screen.
Fn+K Scroll contents Fn+P Pause operation Fn+S Send system request Enter sleep mode Fn+4 To wake up the computer, press Fn or the power button. Fn+Left arrow key Go to beginning Fn+Right arrow key Go to end Use the TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling. Use the TrackPoint pointing device 1.
Replace the pointing-stick nonslip cap Note: Ensure that the new cap has grooves a . Use the trackpad The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform all the pointing, clicking, and scrolling functions of a traditional mouse. Tap on the surface of the trackpad with one finger to perform the left-click action, with two fingers to perform the right-click action.
Two-finger zoom out Put two fingers on the trackpad and move them closer together to zoom out. Two-finger zoom in Put two fingers on the trackpad and move them farther apart to zoom in. Notes: • When using two or more fingers, ensure that you position your fingers slightly apart. • Some gestures are not available if the last action was done from the TrackPoint pointing device. • Some gestures are only available when you are using certain apps.
Tap and hold Open a shortcut menu. Slide Scroll through items, such as lists, pages, and photos. Drag an item to the location you want Move an object. Move two fingers closer together Zoom out. Move two fingers farther apart Zoom in. Tips • Turn off the computer before cleaning the multi-touch screen. • Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the multi-touch screen. Do not apply solvents to the cloth.
Connect to a wired display 1. Connect the external display to an appropriate video connector on your computer. 2. Connect the external display to an electrical outlet. 3. Turn on the external display. If your computer cannot detect the external display, right-click a blank area on the desktop, and then click Display settings. Set the display mode Press or and then select a display mode of your preference. Change display settings 1. Right-click a blank area on the desktop and select Display settings. 2.
18 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Chapter 3. Explore your computer Use the Intelligent Cooling feature The Intelligent Cooling feature enables your computer to work in the following three modes: • Power Saver mode: the quietest fan speed • Balanced mode: balanced performance and fan speed • Performance mode: the highest performance and normal fan speed Your computer starts up in balanced mode by default, do the following to switch to the preferred mode: • Press Fn+L to switch to power saver mode. • Press Fn+M to switch to balanced mode.
Table 1. Default power plan (when plugged into ac power) • Turn off the display: After 5 minutes • Put the computer to sleep: After 20 minutes To reset the power plan to achieve the best balance between performance and power saving: 1. Click on the battery symbol in the system menu drop down box and select Power Settings. 2. Choose or customize a power plan of your preference.
Purchase options Lenovo has a number of hardware accessories and upgrades to help expand the capabilities of your computer. Options include memory modules, storage devices, network cards, port replicators or docking stations, batteries, power adapters, keyboards, mice, and more. To shop at Lenovo, go to https://www.lenovo.com/accessories. Chapter 3.
22 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Chapter 4. Secure your computer and information Lock the computer Lock your computer to a desk, table, or other fixtures through a compatible security cable lock. Note: The slot supports cable locks that conform to the Kensington NanoSaver® lock standards using Cleat™ locking technology. You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo is not responsible for the locking device and security feature.
Use privacy protection (for selected models) Depending on the model, your computer might support the PrivacyGuard feature which keeps you secure without compromising your viewing experience. https://support.lenovo.com/solutions/featurevideo Use the PrivacyGuard feature When the feature is enabled, it darkens screen and reduces visibility from side angles to protect screen content against visual hacking. By default, the PrivacyGuard feature is disabled. You can press Fn+D to enable it.
1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu. 2. Select Security ➙ Password ➙ System Management Password Access Control. 3. Follow the on-screen instructions. If you have set both the supervisor password and the system management password, the supervisor password overrides the system management password. If you have set both the system management password and the power-on password, the system management password overrides the power-on password.
4. Type the current supervisor password in the Enter Current Password field. Then, leave the Enter New Password field blank, and press Enter twice. 5. In the Changes have been saved window, press Enter. 6. Press F10 to save changes and exit the UEFI BIOS menu. • If you have not set a supervisor password, contact a Lenovo authorized service provider to have the power-on password removed.
Chapter 5. Configure advanced settings UEFI BIOS This section introduces what is UEFI BIOS and the operations you can perform in UEFI BIOS. What is UEFI BIOS UEFI BIOS is the first program that the computer runs when the computer is turned on. UEFI BIOS initializes the hardware components and loads the operating system and other programs. Your computer comes with a setup program with which you can change UEFI BIOS settings. Enter the UEFI BIOS menu Restart the computer.
1. Restart the computer. When the logo screen is displayed, press F12. 2. Select the device that you want the computer to start from and press Enter. Detect memory retraining Memory retraining is a process to initialize the memory module and run diagnostic tests for the memory module in your computer.
Chapter 6. CRU replacement Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. The computers contain the following types of CRUs: • Self-service CRUs: Refer to parts that can be installed or replaced easily by customer themselves or by trained service technicians at an additional cost. • Optional-service CRUs: Refer to parts that can be installed or replaced by customers with a greater skill level.
1. Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI BIOS menu. 2. Select Config ➙ Power. The Power submenu is displayed. 3. Select Disable Built-in Battery and press Enter. 4. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. Replace a CRU Follow the replacement procedure to replace a CRU.
Installation procedure T14 Gen 3 and P14s Gen 3 Chapter 6.
Reinstall the screws in alphabetic order (a to g). T16 Gen 1 and P16s Gen 1 Reinstall the screws in alphabetic order (a to h).
Troubleshooting If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power adapter and then reconnect it to the computer. Keyboard Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions. For access, do the following: 1. Disable the built-in battery. See “Disable the built-in battery” on page 29. 2. Turn off the computer and disconnect the computer from ac power and all connected cables.
• For T16 Gen 1/P16s Gen 1 2. Push the keyboard in the direction as shown by arrows to release the latches from the keyboard bezel.
3. Pivot the keyboard slightly upward 1 and then turn over the keyboard 2 . 4. Put the keyboard on the palm rest as shown and detach the connectors. Then, remove the keyboard. Installation procedure Note: You might be instructed to slide the keyboard frame forward or backward in some of the following steps. In this case, ensure that you do not press or hold the keys while sliding the keyboard frame. Otherwise, the keyboard frame cannot be moved. 1. Attach the connectors and then turn over the keyboard.
2. Insert the keyboard into the keyboard bezel as shown. Ensure that the top edge of the keyboard (the edge that is close to the display) is under the keyboard bezel. 3. Slide the keyboard in the direction as shown. Ensure that the latches are secured under the keyboard frame.
4. Tighten the screws to secure the keyboard. • For T14 Gen 3/P14s Gen 3 • For T16 Gen 1/P16s Gen 1 Chapter 6.
5. Connect the ac power adapter and all disconnected cables to the computer. Wireless WAN card and wireless-WAN-card bracket (for selected models) The following information is only for the computer with user-installable modules. Ensure that you use only a Lenovo-authorized wireless module specifically tested for this computer model. Otherwise, the computer will generate an error-code beep sequence when you turn on the computer.
Installation procedure Note: When you install the wireless WAN card, ensure that you connect the blue cable to connector AUX and the orange cable to connector MAIN. Memory module (for Intel models only) Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions. Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get damaged. Chapter 6.
For access, do the following: 1. Disable the built-in battery. See “Disable the built-in battery” on page 29. 2. Turn off the computer and disconnect the computer from ac power and all connected cables. 3. Close the computer display and turn the computer over. 4. Remove the base cover assembly. See “Base cover assembly” on page 30. Removal procedure Installation procedure Note: For T14 Gen 3 Intel models, memory module replacement might cause memory retraining.
When handling the M.2 solid-state drive, observe the following guidelines: • Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for frequent changes or replacement. • Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep. • Do not apply pressure to the M.2 solid-state drive. • Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state drive might get damaged.
M.2 solid-state drive and M.2 solid-state drive bracket (for AMD models only) Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions. Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the M.2 solid-state drive, observe the following guidelines: • Replace the M.2 solid-state drive only for upgrade or repair. The M.
Removal procedure Type 1 Type 2 Remove the screw and remove the M.2 solid-state drive bracket, and then remove the M.2 solid-state drive. Chapter 6.
44 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Chapter 7. Help and support Frequently asked questions How do I access Settings? Open the system menu drop down (top right) and click Settings. How do I turn off my computer? From the system menu (top right) click , and then click Power Off. 1. Press and hold the power button until the computer turns off. Then, restart the computer. 2. If step 1 does not work: What do I do if my computer stops responding.
Error messages If you see a message that is not included in the following table, record the error message first, then shut down the computer and call Lenovo for help. See “Lenovo Customer Support Center” on page 50. Message Solution 0190: Critical low-battery error The computer turned off because the battery power is low. Connect the ac power adapter to the computer and charge the batteries. 0191: System Security - Invalid remote change requested The system configuration change has failed.
Beep errors Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep technology: 1. Go to https://support.lenovo.com/smartbeep or scan the following QR Code. 2. Download the proper diagnostic app and install it on your smartphone. 3. Run the diagnostic app and place the smartphone near the computer. 4. Press Fn on your computer to emit the beep again.
Self-help resources Use the following self-help resources to learn more about the computer and troubleshoot problems. Access product documentation • Safety and Warranty Guide • Setup Guide • This User Guide • Regulatory Notice Visit the Lenovo support Web site https://pcsupport.lenovo.
Access open-source information This device includes software made publicly available by Lenovo, including software licensed under the General Public License and/or the Lesser General Public License (the open source software).
Lenovo Customer Support Center During the warranty period, you can call Lenovo Customer Support Center for help. Telephone numbers For a list of the Lenovo Support phone numbers for your country or region, go to https:// pcsupport.lenovo.com/supportphonelist for the latest phone numbers. Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.
• https://pcsupport.lenovo.com/warrantylookup Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at https:// pcsupport.lenovo.com/warrantyupgrade. Service availability and service name might vary by country or region. Chapter 7.
52 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Appendix A. Compliance information For compliance information, refer to Regulatory Notice at https://pcsupport.lenovo.com and Generic Safety and Compliance Notices at https://pcsupport.lenovo.com/docs/generic_notices. Certification-related information Table 2.
Table 3.
The following illustration shows the antenna locations on your computer: T14 Gen 3 and P14s Gen 3 1 2 3 4 5 6 Wireless LAN antenna (main), for black models Wireless LAN antenna (main), for silver models Wireless LAN antenna (auxiliary), for silver models Wireless LAN antenna (auxiliary), for black models Wireless WAN antenna (main) Wireless WAN antenna (auxiliary) Appendix A.
T16 Gen 1 and P16s Gen 1 1 2 3 4 5 6 Wireless LAN antenna (main), for black models Wireless LAN antenna (main), for silver models Wireless LAN antenna (auxiliary), for silver models Wireless LAN antenna (auxiliary), for black models Wireless WAN antenna (main) Wireless WAN antenna (auxiliary) Operating environment Maximum altitude (without pressurization) 3048 m (10 000 ft) Temperature • Operating: 5°C to 35°C (41°F to 95°F) • Storage and transportation in original shipping packaging: -20°C to 60°C (-4°F
Note: When you charge the battery, its temperature must be no lower than 10°C (50°F). Relative humidity • Operating: 8% to 95% at wet-bulb temperature 23°C (73°F) • Storage and transportation: 5% to 95% at wet-bulb temperature 27°C (81°F) Appendix A.
58 T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
Appendix B. Notices and trademarks Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
