User Manual
Table Of Contents
- Discover your Lenovo notebook
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Secure your computer and information
- Chapter 5. Configure advanced settings
- Chapter 6. CRU replacement
- Chapter 7. Help and support
- Appendix A. Compliance information
- Appendix B. Notices and trademarks
Removal procedure
Notes:
• A mylar film might cover the M.2 solid-state drive bracket. To access the M.2 solid-state drive, peel off the
mylar film first. Do not damage the mylar film and attach it in place after installation.
• There might be thermal pads on the top and under the bottom of the M.2 solid-state drive. When replacing
the M.2 solid-state drive, peel off the thermal pad on the M.2 solid-state drive and attach it in place after
installing the new M.2 solid-state drive. Ensure that the thermal pad under the M.2 solid-state drive stays
in its place and is not removed.
Type 1
Type 2
Chapter 6. CRU replacement 51